It took bout two days but I messed up the emails a few times. They never actually gave me the number they just told me when it would arrive. It seemed shady but it turned out fine. I would go somewhere else but I still need the evo cmc and ima get blox roll stopper so the cheapness is nice but I'm still not sure what ima do.

 

How's the flywheel situation

 

Any further news on fitment ?

 

Ive been really busy with work right now. When i do order it its gonna be the one for the 4g69 eclipse.

 

im gonna be ordering one next monday i am still goin back and forth on which to choose. i have found that the one that it says is for the probe and mazda (fw-0103-al) is what vivid racing pairs with clutches for our cars so i may go with that one. what kind of clutch did you get again?

 

I have a clutchmasters clutch sitting here, i just gotta order my flywheel. I dont see why the eclipse 4g69 flywheel would be different than our flywheel. Does anybody have a picture of a flywheel for our car? Doesnt matter if its stock or not. Here is one for a probe to compare. I dont think it will work.

 

It's the same flywheel. The clutch is different.

 

The same flywheel as what? The eclipse 4g69 or the probe?

 

Ralliartize It, this is the pic of the fidanza flywheel you have posted.

If you look at the pic i posted of the ford probe flywheel, the bolt pattern isnt even the same. Look at the part number for the probe flywheel and the part number for the eclipse 4g69 flywheel. The eclipse is fw-103-3al and the probe is fw-0103-3al. I think that its just a screw up on the site because the numbers are so close together.

 

The 4g69 Eclipse and 4g69 Lancer RA have the same flywheel. The clutch is different between the two vehicles.

 

Ok thanks. I didnt know which flywheel you were talking about. What makes the clutch different? Are the trannys the same?

 

I believe the eclipse clutch disc is 2mm smaller.

 

So for I learned the hard way....I talked to Clutchmasters after ordering a CM Flywheel from a site that had the 4g69 listed as fw-0103-al.....THIS IS NOT THE RIGHT FLYWHEEL!....The correct number is either fw-103-al OR fw-045-al...I guess CM changed the part number to fw-045-al recently because of the part number getting mixed up with fw-0103-al i'm assume.
The site i ordered from had me ship mine back to CM but if I wanted the correct part I was going to have to pay shipping and wait probably a extra week. I was a bit bummed bout this bc I ended up having to just have my stock refurbed and put back in.

 

they list the fw-045-al for the oz lancer too. i wanted to het the clutchmasters but there are places cheaper than their site and i cant find the fw-045-al anywhere. i read some where the fidanza flywheel wont pair up with act. ive attempted to find an act fw (i read someone on here had one for their ra but they never got back to me) to no avail. anyone know anything about those aasco or whatever they are called. i think vivid sells them

 

I read in club4g that a guy has the mr1-hdg6 clutch on his gs so i think im pretty safe with the FW-103-3al. I'm trying to find some specs on the bolt patterns but its coming up short for now