RalliBox

Hey guys/girls this is my first post, but long awaited. I got my 09 TB Ralliart last Oct. after I found out about the easy tune and how great it looks. I have finally ordered the Tactrix OP2.0 and boost pill. Cable will be here today and pill within days Can't wait to join in all the fun you guys are having with these flashes!!!!

Rralliart09

You'll be amazed at the difference. Just be careful removing the stock pill. Mine is an 09 as well and the vacuum lines can be a bit dried out as well as the T fitting that's there. Just be firm but patient and it'll come out. Have fun! It's really a blast after you flash it.

RalliBox

Thanks for the advice! So I couldn't wait for my pill so I went ahead with the base pill flash for now and it does make the car feel a lot more smooth between shifts. I love it so far. Now I can't wait to get the pill in!!!

Thanks to richardjh for the incredible rightup on how to do the flash. You made it incredibly easy for a first timer(Me). Many, many thanks. It was a no brainer. I was scared as hell going into it, having never done anything like this before, but whoa it was easy easy with your tut. And of course thanks to the guys over at Razorlab, especially Bryan!!1

richardjh

Glad to hear it went well. I don't think I breathed at all throughout the very first (seemingly endless) reflash! :P

Rich

hotkupa

iTrader: (1)

Just a quick question. Its been a while since i did this. When I was switching maps today I pressed read from the ecu. Read Image came up in my Open Rom Documents. Than i added the another map to Open Rom Documents and pressed test write after it was done i wrote the highlighted map to the ecu. Just wanted to make sure I have the right map in my ecu. Thank you.

RazorLab

iTrader: (8)

No, test write just verifies that the map is writeable. You need to actually do the write button.

Wille

Hi, now i have read my ECU.
It says year 2009 and Internal ID 53610013



Does it means that i should use the 2009 Mitsubishi Lancer Ralliart Base Map Roms ?
(I just got a new AWC pump and new updated data on warranty)


EDIT: when i open the 2009 GST Basemap file it has internatl id 53610010 and the 2010 GST Basemap file has 53610013 (and still "year 2009)
So maybe its the 2010 Mitsubishi Lancer Ralliart Base Map Roms i should use?

richardjh

No, not 2009 - use the 2010 AUS/EDM ones.

The 2010 Base Maps are built on 53610013.

Rich

hotkupa

iTrader: (1)

Got it. Thanks.

Wille

Great, thanks.
Now its time to switch to the AMS boost pill

Exige90

iTrader: (1)

Just wanted to post up my 1/4mi times: V3.0 Boost pill + 93 oct basemap, 13.44s was my best of three runs. Beat an Evo X head-to-head!

ExRotary

Its almost too easy isn't it - boost pill, base map, beat an Evo. Its not a fluke, the guys quoted on page 1 got times in the same ball park.

Have you sorted out your logging problem? I notice that you are still on V3.0

danike

Well, my faithful 09 RA 100% stock with 108,000 miles has a birthday coming with presents. K&N Air Filter, AMS Boost Pill, Tactrix Cable, TurboXS TBE, and most importantly, the correct GST Basemap to make it all work properly.

My question is should I use the V3.0 or the V31.003? What is the difference?

Rralliart09

V31 is the latest version. It's be refined over the years to smooth out the engine/TC-SST relationship and such in addition to adding power (making the car drive as it should've from the factory) safely. You always want to go with the latest versions.

DJEllipse

UPDATE !!!

Exaust manifolt had a leak, and timing chain was off by two pin.

He had that fixed and we'll give you more detail nex week when the car will get out of the garage !