Ems Starting Fix For Evo Viii
#1
Former Sponsor
Thread Starter
iTrader: (21)
Join Date: Jun 2003
Location: Edison
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
Ems Starting Fix For Evo Viii
Everyone having problems with the start on the evo we think we've found the cure ..
Go to setup / sensors / cam crank sensor / advanced cam/crank
Under the options pull down ..
Where it says " Tooth time min " enter 500 ms
Where it says " Sync early " check the box ..
Let me know
Mark
Turbotrix
Big thanks to jason siebels from aem ... for helping with this on going prob
Go to setup / sensors / cam crank sensor / advanced cam/crank
Under the options pull down ..
Where it says " Tooth time min " enter 500 ms
Where it says " Sync early " check the box ..
Let me know
Mark
Turbotrix
Big thanks to jason siebels from aem ... for helping with this on going prob
#4
Former Sponsor
Thread Starter
iTrader: (21)
Join Date: Jun 2003
Location: Edison
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dutch
That made no difference for me...
Dutch ..
try leaving the key in the one postion for about 3 sec,,then crank. Also in the engine start menu, set your fuel pump to prime for 3-5 sec. Try that ,,, what i noticed is ..it will take about 1 sec to sync for about 6 trys ..then on the 7th or 8th ..it will go back to 4 sec ... let me know
Mark
Turbotrix
#5
Evolving Member
Join Date: May 2003
Location: Arizona
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Works awesome!!!! I was already fairly happy with my start up as it would start after 4 or 5 turns and then come to idle perfectly even in cold conditions, but with this now it starts on the first crank!!! Sweet!
#6
Evolving Member
Join Date: May 2003
Location: Arizona
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
For what it's worth I think this is more of a fine tuning detail. If your initial crank and warmup maps aren't set up near perfectly then this won't really help all that much with start up in my opinion. The AEM has taken a little while to tweek the driveability, but I can honestly say that the car has at least as good if not better than stock driveability.
#7
Evolved Member
iTrader: (22)
Join Date: May 2003
Location: Ozark, MO
Posts: 1,689
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bs
For what it's worth I think this is more of a fine tuning detail. If your initial crank and warmup maps aren't set up near perfectly then this won't really help all that much with start up in my opinion.
Trending Topics
#10
Evolved Member
iTrader: (70)
Join Date: Jul 2004
Location: La Isla Del Encanto
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by awddyno
I've tried this setting. Sometimes it starts in three crank rotation, sometimes six. Kinda annoying.
I tried something that works but I'm not sure yet what it does to overall timing.
Sync Crank S Count --- ON
Sync Teeth --- 0
It starts right away but would this change anything else?
I tried something that works but I'm not sure yet what it does to overall timing.
Sync Crank S Count --- ON
Sync Teeth --- 0
It starts right away but would this change anything else?
#11
Evolved Member
iTrader: (15)
Join Date: Jun 2005
Location: Midwest
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
new setting works for me, I've been driving on it for a week, and always has quick start up.
its a little different than what I originally posted. But noones interested since all your cars already have quick start up.
its a little different than what I originally posted. But noones interested since all your cars already have quick start up.
#12
Newbie
iTrader: (4)
Join Date: Feb 2004
Location: Maryland
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
EVO 8 HARD TO START AEM EMS 1313U WITH 3.5 BAR MAP SENSOR. Go to setup / sensors / cam crank sensor / advanced cam/crank
Under the options pull down ..
Where it says " Tooth time min " enter 500 ms
Where it says " Sync early " check the box ..
DID NOT HELP ANY OTHER IDEA
Under the options pull down ..
Where it says " Tooth time min " enter 500 ms
Where it says " Sync early " check the box ..
DID NOT HELP ANY OTHER IDEA
#13
any idea on fixing my cold start?
it goes from 1500 rpm drops down to 500rpm, goes up and down until the engine warms up...
I don't know which setting this is doing..
it goes from 1500 rpm drops down to 500rpm, goes up and down until the engine warms up...
I don't know which setting this is doing..
#15
cold start fix:
+ more fuel at warm up enrichment
+ Optima red top battery
that seem to work fairely well.
Under the options pull down ..
Where it says " Tooth time min " enter 500 ms
Where it says " Sync early " check the box ..
Let me know
Mark
Turbotrix
Where it says " Tooth time min " enter 500 ms
Where it says " Sync early " check the box ..
Let me know
Mark
Turbotrix
+ Optima red top battery
that seem to work fairely well.