I tryed doing some searches but I couldnt find anything to answer my question.
I have a aem 1313 not the 1313u ems. I also have a aem 30-4100 wideband gauge and i heared that you could hook them up together. what will i gain from hooking them up together will it be like the 1313u? how would i hook them together?

 

i really want to know this to......

 

You can log your a/f ratio along with other parameters for tuning, and you can enjoy close loop driving to better your gas millage and quality of cruising.

 

ok now how would i hook them together? do i not use the gauge anymore?

 

Due to the questions you are asking I would strongly suggest you go to your tuner and have him do all these things for you... and, no, you will not lose the a/f display since all that will be done is simply to allow the EMS to see what the gauge is indicating.

 

well that would work if my tuner knew i asked and he said that there was a way but he didnt know how and i iam good with wiring since i own and operate a car audio and electronics store.

 

Sorry to sound like an a$$ but an experienced tuner should know how to make this type of connection. After the connection is made some changes have to be made in the software(o2 gain adjustment) in order to "sync" both readings and then the close loop configuration(when to and when not to allow corrections and how much). Just a pointer so you don't screw up anything.

 

thanks for the info is there any wiring diagram or anything or its just if someone knows it then thats that. i would like to wire it myself and then have someone do all that setting and stuff. i just had a bad exp. with letting someone wire stuff in my car so i rather get it all set and then get the settings done

 

Look in the manual, its all there.