well i went out to the track today and witnessed whiteevo hit his 11's finally, although i was not expecting to run cuz i havent quite figured out how to up the boost with the GM boost control solenoid, it was only hitting 10lbs and falling to 9 my mods are AEM EMS, AMS LICP, and B&B 3"TBE and i managed a 13.9@97 with a 1.97 60ft. not to bad i guess for what my boost was at

 

why were you boosting so little?

 

i find that hard to beleive boosting that low of psi

 

I've ran that amount of boost but I was trying to save gas, that's pretty good time for that boost tho.

 

only reason for boosting so low is because my buddy and i havent figured out how to turn up the boost with the gm boost control solenoid, i tried hooking a mbc at the track, but it was hitting 28lbs and running at 12.8-13.0 a/f, for some reason the injectors were maxed out, they were hitting 120% injector duty cycle, which they shouldt be with what mods i've got

 

You can not figure out how to turn up the boost in the AEM EMS?

 

Wastegate base pressure is 11psi, your boost guage must be off.

 

i dont have a boost gauge, i just go off by what the engine load on the aem is, which i'll believe over any boost gauge anyday of the week