7.78 1/8 mile
Got a LIL sideways in the burnout box.
My Other Run

 

y would u try to do a burn out... ur just messing up ur clutch for no reason..

if u were spinning through first and second okay... but thats just pointless

 

Was that Irwindale Speedway ?

 

1st I have a upgraded clutch!!.. 2 sec I have have seen a difference between just rolling passed the burnout box and doing a quick launch to clean off the tires!!
Because at IRWINDALE SPEEDWAY they really like to spray alot in the burnout box..

 

mods?

 

vid's not working...but can you drive around the burnout box and avoid getting that crap on your tires? i know at PR in washington you can drive around the box

 

aint working for me either!

 

island dragway and englishtown also for driving around the burnout box.

 

255FP/HKS FILTER WITH INJEN INTAKE WITH UICP/TBE/MBC/ACT HDSS....And every time I race I use race gas 100/103...
And you can't really drive around the burnout box!! You will still endup driving in it!!

 

There working now!!

 

can you post your stats of the time slip? very nice run btw.

 

Sorrry there in the trash,,,

 

Looks like fun.

 

The 1/8th mile tracks around here suck. You pick up rocks and other stuff rolling through the staging lanes, so rolling through the water box and cleaning off the tires helps.

 

Nice!

What launch technique did you use? I hear you bouncing off the rev limiter, did you set it to 6000rpm? Sounds a bit lower at 5000rpm?

And on green, did you basically floor the throttle and dump the clutch, or did you do something different?

Warrtalon recommends i think 6000rpm and letting the clutch out quick (not dumping), but on my Evo IX, if i do that the clutch just slips (yes i'm on stock clutch). I find if I set the rev limiter to 5000rpm, i still dont bog but I dont get too much clutch slippage either. I am guessing because the IX has more torque perhaps? I tried 3000rpm that doesn't work. I have yet to try 4000 or 4500rpm, but I suspect it may bog.