Runnen the 61 mill. MR
Thread Starter
Evolved Member
iTrader: (7)
Joined: Jan 2007
Posts: 874
Likes: 1
From: hershey pa/williamsport
Runnen the 61 mill. MR
So i went to the track with my MR equiped with a precision 61mm DBB turbo running 26 psi. This setup made 428 ona mustang dyno. I could not get a good launch to save my life...didn't bring my tactrix cable and was bogging off launch controll at 6k. my 60's were all mid to upper 1.8's. I recently reflashed with a 6800 rpm SRL and tephra NLTS. Im wandering how much you guys think my times can improve..... assuming i can cut upper 1.6 60's and i did 12.03 at 120....ps i just wanted to add shifting to 5th at 1000ft sucks
So i went to the track with my MR equiped with a precision 61mm DBB turbo running 26 psi. This setup made 428 ona mustang dyno. I could not get a good launch to save my life...didn't bring my tactrix cable and was bogging off launch controll at 6k. my 60's were all mid to upper 1.8's. I recently reflashed with a 6800 rpm SRL and tephra NLTS. Im wandering how much you guys think my times can improve..... assuming i can cut upper 1.6 60's and i did 12.03 at 120....ps i just wanted to add shifting to 5th at 1000ft sucks
Thread Starter
Evolved Member
iTrader: (7)
Joined: Jan 2007
Posts: 874
Likes: 1
From: hershey pa/williamsport
I have heard that 6 speed is probly hurting me by about 2 miles an hour and maybe 2 tenths. Anyone else no anyhng about what putting a 5 speed in the car would do for me at a track?
Thread
Thread Starter
Forum
Replies
Last Post
Smike
The Loft / EvoM Car Talk Corner
265
Sep 4, 2012 06:54 PM




