Boostin Performance's "Red Demon" Shop Drag Car
Thread Starter
Former Sponsor
iTrader: (7)
Joined: Jan 2011
Posts: 1,367
Likes: 16
From: 2116 Stonington Ave Hoffman Estates IL 60169
Got back from the dyno last night and I could not be happier. I was hoping for mid 700's, but the car made 786 hp and 598 tq on the mustang dyno. Last year the car made 705 on a mustang dyno, so 81hp over last year is great and even more then I was hoping for.
The 10.5/1 motor is great. With the FP3586 I had 30psi at 5,000 rpm. Next step is to get some times on this turbo setup then upgrade to the FP3794 for the shootout!
Bringin it to the track asap, hopfully tomarrow if the weather holds out.
Devin
The 10.5/1 motor is great. With the FP3586 I had 30psi at 5,000 rpm. Next step is to get some times on this turbo setup then upgrade to the FP3794 for the shootout!
Bringin it to the track asap, hopfully tomarrow if the weather holds out.
Devin
nice to see you got the cover off that baby and are back on TRACK
after seeing that pass last year at the shootout i personally call it the bullit
cause it looked like it was shoot out of a cannon!! aint been on here in a while, looks like i got some reading to do. i'm gonna give it a try with the wife to get up early to make the drive, i sure would like to be there. anyway good luck...... 30psi at 5,000!! hold on tight !!
after seeing that pass last year at the shootout i personally call it the bullit
cause it looked like it was shoot out of a cannon!! aint been on here in a while, looks like i got some reading to do. i'm gonna give it a try with the wife to get up early to make the drive, i sure would like to be there. anyway good luck...... 30psi at 5,000!! hold on tight !!
Last edited by marrrk; Jul 23, 2011 at 01:57 PM.
Thread Starter
Former Sponsor
iTrader: (7)
Joined: Jan 2011
Posts: 1,367
Likes: 16
From: 2116 Stonington Ave Hoffman Estates IL 60169
Just got back from the track, I had alot of fun today!
Got some valuable time in the drivers seat, and we are well on the way to some nice 8 second passes on the FP3586. We are going one more time to the track on the FP3586, but that FP3794 is calling me
Car went 9.0 @ 161.8 with a not so great 60 ft.
The dogbox has a much longer first gear, but after some adjustments we ended up with a 1.47 60 ft. If I can get the car in the 1.3's like last year, I'll be very happy.
Devin
http://www.youtube.com/watch?v=8KxwIRPz_XQ
http://www.youtube.com/watch?v=kqXV8_f1J8M
Got some valuable time in the drivers seat, and we are well on the way to some nice 8 second passes on the FP3586. We are going one more time to the track on the FP3586, but that FP3794 is calling me
Car went 9.0 @ 161.8 with a not so great 60 ft.
The dogbox has a much longer first gear, but after some adjustments we ended up with a 1.47 60 ft. If I can get the car in the 1.3's like last year, I'll be very happy.
Devin
http://www.youtube.com/watch?v=8KxwIRPz_XQ
787 pull on the mustang dyno
http://www.youtube.com/watch?v=kqXV8_f1J8M
car looks fuggen TIGHT! very nice for the first passes of the year, now you gotta start hammering that tree! maybe you should run the pro tree this week, ohio is just around the corner bro
Thread Starter
Former Sponsor
iTrader: (7)
Joined: Jan 2011
Posts: 1,367
Likes: 16
From: 2116 Stonington Ave Hoffman Estates IL 60169
Thats the plan. Just got the SparkTech seq. installed. We are heading to the track on Sunday with Joey Evosick2332 and his "Junk Box". We are going to Byron for anyone interested in coming with.
Devin
Devin
Good luck on your outing today Devin..
for anyone interested in watching live timing this site is pretty cool http://www.1320go.com/byron/livetiming.php
for anyone interested in watching live timing this site is pretty cool http://www.1320go.com/byron/livetiming.php






