For all you guys that are running 160+ terminals in 4th gear what setups are you using?

Do you use RS or GSR or custom ratios?

4.11 drive?

What tire sizes do you run on DOT tyres? MH 26.5, 15 inch wheels?

What RPM do you need to run in 4th on the above setups snd what potential terminals would it give you?


Thanks for the help

 

I also would like to know this

 

Evo 8 4th gear + 4.53 (stock) + 26" M/T = 9250-9350 rpm and low 160 mph traps

Evo 8 4th gear + 4.11 + 24.5 M&H = 8900-9000 rpm and 165+mph traps

Devin

 

26" tires grow somewhat the faster they spin, so there is some variable gearing gained there. Normally its 26s, stock gearing with VIII 4th, 9600+ rpm.

The new drag car that we (ETS/ER) are campaigning uses a PPG dogbox which is 1:1 4th gear, 4.30 FD, and 26" tires.

 

My car is an evo 7 with jdm evo 6 rs gearbox and rear diff. I was told that I may finish the 1\4 mile in 5th is that the case?
235/40/17 tyres

 

I believe you should be finishing at the very end of 4th if your rev limit is unchanged.

 

Hmm... so with my stock evo 9 trans and 26" Hoosiers
I won't finish in 4th gear about 155mph?

 

thanks

 

http://www.jackstransmissions.com/pa...on-gear-ratios

 

http://www.f-body.org/gears/

You're welcome.