2-step process..
#31
Evolving Member
iTrader: (27)
Join Date: Sep 2007
Location: Vilseck
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Well I have an evoIX and the previous owner told me he got a reflash but I duno about the 2step... I just dynoed and was up around 320whp and 318tq and was told everyting was about right...
If I push my clutch in and rev up to redline but it just keeps on going not bouncing off, I would suspect that the 2step was deleted then?
If I push my clutch in and rev up to redline but it just keeps on going not bouncing off, I would suspect that the 2step was deleted then?
clutch all the way down
put it in first gear
rev up your car till it hits the limiter
you should try that, if it doesnt do it with in first gear with clutch down revving it then
it must not be set.
#33
Evolving Member
Join Date: Mar 2008
Location: Corning
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
To the OP the 2step isnt a launch technique..its part of the launch control on 05+ evos. You guys say 03-04 doesnt have it i have a 05 so im assuming its safe to say 05+ have it :P
My 2step is set for 6000rpm by the way. Yeh its gunna be rough on the clutch and if you always launch your car at every chance you get then you will put more wear and tear on parts faster.
Dont be afraid to break something..its part of the game. However by keeping yourself informed and not being a douchebag you can greatly reduce the chance you break something.
My 2step is set for 6000rpm by the way. Yeh its gunna be rough on the clutch and if you always launch your car at every chance you get then you will put more wear and tear on parts faster.
Dont be afraid to break something..its part of the game. However by keeping yourself informed and not being a douchebag you can greatly reduce the chance you break something.
Thread
Thread Starter
Forum
Replies
Last Post