6 - Next step - installing the specially sized sprayer nossel in the upper fmic pipe

You drill a small hole - I chose to do it on the lower bottom side - be a prudent mechanic - always stuff a rag in the fmic pipe on the car to prevent anything from dropping in wheil you are working - BUT make sure you remove it before you put the fmic pipe back on !

Here is the outside view - use lock tight on the threads

 

Jesus Christ I'm getting old (more like wore out)... for a second, I forgot that was the intercooler sprayer... maybe it's time for some medication.

 

8 - Here is in inside of the nozzel - sure its big and ugly but you wont care after you feel that alcohol get vaporized and your air intake temps drop so low your car thinks its running on some stoli from a ide box

You want to position this as close as possible to the trottle body and as close to the center opf the pipe - this makes for a great distribution of th misted evaporating alcohol

Also - get some el cheaop black plastic wire loom - (radio shack - pep boys) and wrap the steet braided teflon lined hose with the black plastic loom - wrap some black eletrical tape every few feet on the loom - this will keep the braided hose from scrathing your car or cutting into any wires of hoses

 

You got me , wish you had one left i would buy it and have you bring it out!

 

Dont worry bro when this kicks in you'll feel 18 once again

 

"As I said - if you want one - I will come there and tune it personally for you"
mark me down for AUG time frame in Chicago Al. 1000.00 is a good deal.

 

Hey Al are those pics from ur Personal car did u do it yet on ur own car ??

 

If you want one - I can get you one unit which I have in hand for a customer who is on vacation for a week and get him a replacement

Just let me know and I will bring it with me

 

AL,

I am curious if you mount the injection nozzle that close to your throttle body, where does the IAT sensor for you AEM go?

 

These pics are on my personal car - I will be finsihing the install later today and then headed to the dyno tommorow

www.iveyleaguetuning.com has helped me to create some revolutionary new mapping methods for the AEM EMS unit which my race car is running and this combined with the alcohol kit should allow me to hit at least 600 whp on pump gas.

 

Hey AL, do you have another kit on hand?

I can Paypal you the money today.

LMK

Thanks

 

Good news guys - the manufacturer has just finshed 4 new units today which will ship tomorrow

I am taking orders on those units now which will ship on Tuesday when I return from Phoenix

Remember its $499 shipped anywhere in the US - international orders will require additional shipping charges

 

this is so tempting...................

ERIK

 

Make sure to take a video of that DYNO or u want me to come out and take it ??

 

If you want to come out early on wed we can pull your oil pan and do those rod bolts and head studs the same day !

HEAD STUDS are needed with this kit

The stock head bolts will S T R E C H O U T !!!!!!!!!!!!!!!!!!