Evoscan 0.9 map reading
Originally Posted by nj1266
Do you have to disconnect the rpm convertor from the LM-1 so it can log with Evoscan? Can't we just use the serial output cable from the side of the LM-1 box (the port we use to download to the pc) and connect that to Evoscan and log?
Originally Posted by nj1266
Can't we just use the serial output cable from the side of the LM-1 box (the port we use to download to the pc) and connect that to Evoscan and log?
Originally Posted by AlwaysinBoost
I tried that on my car and it doesn't work with v.9
Originally Posted by MalibuJack
A friend in Taiwan is going to hit the parts department this weekend for me.. If it works, I'll arrange to get a few of them.
pm me here or on active matrix
EvoM Guru
iTrader: (50)
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by C6C6CH3vo
I didn't even know the manifold had a pressure sensor besides the differential pressure sensor - that reads the change of psi accross the TB flapper
Originally Posted by andenbre
If it works without buggering up the usdm I will be very willing to take one off your hands(obviously with reimbursment)
pm me here or on active matrix
pm me here or on active matrix
Not that I'm qualified to be saying this, but what the hey, I will anyways...
I would think that if you just throw the JDM IX MAP sensor in there that it's gonna throw some kind of code and you'll get an SES light. Won't the ECU see an unexpected reading/voltage from the MAP sensor and freak out? I kinda home I'm wrong though.
Maybe it'll just keep humming right along and just report the higher value, who knows.
I would think that if you just throw the JDM IX MAP sensor in there that it's gonna throw some kind of code and you'll get an SES light. Won't the ECU see an unexpected reading/voltage from the MAP sensor and freak out? I kinda home I'm wrong though.
Maybe it'll just keep humming right along and just report the higher value, who knows.
Originally Posted by RedV
Not that I'm qualified to be saying this, but what the hey, I will anyways...
I would think that if you just throw the JDM IX MAP sensor in there that it's gonna throw some kind of code and you'll get an SES light. Won't the ECU see an unexpected reading/voltage from the MAP sensor and freak out? I kinda home I'm wrong though. Maybe it'll just keep humming right along and just report the higher value, who knows.
I would think that if you just throw the JDM IX MAP sensor in there that it's gonna throw some kind of code and you'll get an SES light. Won't the ECU see an unexpected reading/voltage from the MAP sensor and freak out? I kinda home I'm wrong though.
Maybe it'll just keep humming right along and just report the higher value, who knows.
Thread
Thread Starter
Forum
Replies
Last Post
06Black
ECU Flash
41
Jul 6, 2016 12:43 PM
darkmitsu
Lancer Engine Management / Tuning Forums
6
May 19, 2010 08:37 PM
