The highest RPM i can seem to log with V7 Evo IX, and 2.6 is 8000.

I rev to 8500 on a HTA 35r... am I missing a table adjustment in evoscan or something?

 

 

Got evoscan 2.6 now I would like to learn about tuning.Can anyone tell me how to use the evoscan, and how to log data. I wanna see my HP please explain details and what Do i need to adjust before start logging because I'm baby with this program So.. you guys can PM me about this too. any recommend or suggestion would be appreciated !

Thanks in advance

 

hey how do i use the 1 byte load logging? i'm using 90550001 tephra 5.10 and i'm logging with mitsulogger cuz i have an aem wideband. do i need to make any xml changes in either ecuflash or mitsulogger? also what do i need to select in mitsulogger to log 1 byte load?

please help me with this
gerard

 

Look at the "How to Tune an Evo". You will need a tactrix cable to connect to your evo. There is a video on youtube which helps you start up. Just type in "EvoScan" and there should be a little tutorial on how to start

 

Question... i have evoscan v2.6 with an 03 evo and i just got the tactrix cable.. i want to know how to log my power and speed with evo scan.. if you can help. also are there any user guides floating out there on how to operate evoscan.?? thanks ...

 

I got everything But how to log to see HP and Tq ? Just select start logging and start log from 2500RPM to 7000RPM and stop logging ? or what i need to do for the log ? and after log how I can get the graph for HP and Tq. If anyone would help describe step by step that would be cool!

thanks

 

^^

Download the Virtual Dyno Room (VDR) Excel file.
https://www.evolutionm.net/forums/ec...simulator.html

Everything you need to know is in that thread. Just copy in the RPM and LogEntrySecond columns into the excel file. Update the spreadsheet with your cars specific info and you are good to go.

 

hi guys

any one know if EvoScan GPS Navigator will work with tactrix open port 2.0? And how please!!!

thanks

mark

 

Kk. Can't help ne one else, but my load tables just go to 100%! ECU flash goes to 300, but on evo scan I can just get it to read 100. How can I fix that?

 

Got the Limitless Designs 1.3U cable, confused as to which software to use to disable the P0300 test, and force OBD inspection to pass. Ecuflash, or would I have to purchase evoscan? Inspection is way overdue, need help asap. Thanks Guys!

 

You would need ECUFlash to disable the code.

 

Thanks, by any chance would you know where the license number would be located? It's supposed to be included with the cable that I bought.

 

So i finally hooked up the cable so i could log the AEM UEGO it works for about 30 seconds then the AFR reading freezes i am running windows 7 and logging with evoscan 2.6 and i have a tactrix cable 2.0

 

You don't need an license # to use ECUFLash. What cable do you have? If you bought a 1.3 series cable, you need the 1.3U cable to reflash your ROM.