EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
ECU Flash

Lean spool qestions....

Thread Tools
 
Search this Thread
 
Old Jun 13, 2007 | 06:45 PM
Share
  #46  
taenaive's Avatar
taenaive
Evolved Member
iTrader: (20)
 
Joined: Apr 2005
Posts: 920
Likes: 0
From: Chantilly,VA
Originally Posted by occultworks
Change the address of "anti-lag stop" up 2 and it will be an rpm value. Don't know if you knew this taenaive, so I thought I'd point it out.
Yes, I have that already and mine is set at 7300rpm. I am kinda convinced that anti-lag stop is AFR. I rasied the value of anti-lag stop and the lean condition below 2500 is now rich condition.
Reply
0
Old Jun 13, 2007 | 10:34 PM
Share
  #47  
mrfred's Avatar
mrfred
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by taenaive
Yes, I have that already and mine is set at 7300rpm. I am kinda convinced that anti-lag stop is AFR. I rasied the value of anti-lag stop and the lean condition below 2500 is now rich condition.
It is an AFR value. Increasing the value should create a leaner condition below 2500 though. My current 88590015.xml file is attached. There are several tables that are not yet fully defined. I don't recommend messing with those. :-)
Attached Files
File Type: zip
88590015.zip (2.4 KB, 10 views)
Reply
0
Old Jun 14, 2007 | 04:30 PM
Share
  #48  
taenaive's Avatar
taenaive
Evolved Member
iTrader: (20)
 
Joined: Apr 2005
Posts: 920
Likes: 0
From: Chantilly,VA
AFR value should go down if you increase the value. Your AFR16 definition is telling me the same thing.
Anyway, Do you have addresses for 96940011?
Reply
0
Tags
Back to Subforum
ECU Flash
View Next Unread
Mitsulogger use with a wideband???




Advanced Search

All times are GMT -7. The time now is 01:50 AM.