Help!!!!!!!!!!
Did you load your stock map for a back-up first?
If so, you should be able to figure out your ECU ID. It's possible you loaded a map for the wrong ECU ID onto your car.
This is different from the immobilizer code. It specifies where each map exists in the memory. If you loaded an image where these locations were wrong, it may not even start.
If so, you should be able to figure out your ECU ID. It's possible you loaded a map for the wrong ECU ID onto your car.
This is different from the immobilizer code. It specifies where each map exists in the memory. If you loaded an image where these locations were wrong, it may not even start.
Care to elaborate on how to disable the immobilizer? I doubt he has the same ECU id as you.
&
No i didnt say the stock ROM, i have went over the already....I ****ED UP, i kno...But there has to be a way for me to get my car running
no
Tow to dealer is in your future.
Congratulations, you need to purchase a new ECU from the dealer as you overwrote your immobilizer code and without it, you will not be able to start your car.
The new ECU will sync itself with your immobilizer from my best information and you will need to download the flash off your new ECU, save it so this does not happen again.
The new ECU will sync itself with your immobilizer from my best information and you will need to download the flash off your new ECU, save it so this does not happen again.


