Notices
ECU Flash

how-to: Log AFR from the LC-1 w/o a serial cable

Old Apr 16, 2008 | 05:10 PM
  #31  
mrfred's Avatar
Thread Starter
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
So you changed the appropriate ADC channel to FFFF8408?
Reply
Old Apr 16, 2008 | 05:57 PM
  #32  
tephra's Avatar
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
yup
Reply
Old Apr 17, 2008 | 04:14 PM
  #33  
bnice01's Avatar
Evolved Member
iTrader: (4)
 
Joined: May 2007
Posts: 688
Likes: 0
From: Hurlburt Field, FL
NGK Works as well

Since I have the first gen NGK wideband they do not come with wires for an analog output. All I had to do is call NGK and they shipped the wires/pins to connect into the harness for free. There are two wires, brown for analog output ground and yellow for analog output signal. The brown does not have to be hooked up to any ground. I just connected the yellow wire to the rear o2 input on the ecu with some evo8 pins I had laying around. Used this formula in evoscan 0.0274*x + 9.0 since it has a afr range 9.0-16.0 , followed the instructions supplied by mrfed, and wa la I'm loggin afr's with my lunchbox wideband.
Reply
Old Apr 17, 2008 | 04:28 PM
  #34  
mrfred's Avatar
Thread Starter
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Whoa. Hopefully you omitted some info. Where did you get the 9.0 - 16.0 range?
Reply
Old Apr 17, 2008 | 05:55 PM
  #35  
bnice01's Avatar
Evolved Member
iTrader: (4)
 
Joined: May 2007
Posts: 688
Likes: 0
From: Hurlburt Field, FL
thats the min and max the ngk can read or its range
Reply
Old Apr 18, 2008 | 08:13 AM
  #36  
fas-n-furyus's Avatar
Newbie
iTrader: (1)
 
Joined: Dec 2006
Posts: 63
Likes: 0
From: in my car
Originally Posted by mrfred
Someone will have to take a look at your ROM.
Tried to post my rom here on the forum but when i zip my rom the file, the size is 121KB and a max of 100KB is allowed for attachments
Reply
Old Apr 18, 2008 | 08:33 AM
  #37  
BarryC's Avatar
Evolving Member
iTrader: (3)
 
Joined: Aug 2006
Posts: 264
Likes: 0
From: Ireland
Originally Posted by tephra
as per pm - 8409 should be fine on 90550001.

baz is going to send me his rom so i can dbl check!
all sorted now Cheers Dave,

I had changed mut 120 to 8409 instead of mut 12
silly mistake,
works brilliant well done mrfred excellent mod.
Reply
Old Apr 18, 2008 | 08:57 AM
  #38  
mrfred's Avatar
Thread Starter
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by bnice01
thats the min and max the ngk can read or its range
ok, just wanted to be sure that the numbers were not arbitrary.
Reply
Old Apr 18, 2008 | 09:08 AM
  #39  
bnice01's Avatar
Evolved Member
iTrader: (4)
 
Joined: May 2007
Posts: 688
Likes: 0
From: Hurlburt Field, FL
Originally Posted by mrfred
ok, just wanted to be sure that the numbers were not arbitrary.
LOL my bad I was pretty excited when I was writing yesterday but again mrfred another great mod
Reply
Old Apr 18, 2008 | 10:34 AM
  #40  
mrfred's Avatar
Thread Starter
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by bnice01
LOL my bad I was pretty excited when I was writing yesterday but again mrfred another great mod
Thanks. More good stuff coming. :-)
Reply
Old May 2, 2008 | 02:07 PM
  #41  
dryad001's Avatar
Evolved Member
iTrader: (27)
 
Joined: Nov 2003
Posts: 2,123
Likes: 1
From: Oak Creek, WI
Anything for the 94170014 ROM?
Reply
Old May 5, 2008 | 05:05 AM
  #42  
DCsleeper's Avatar
Evolving Member
iTrader: (11)
 
Joined: Apr 2004
Posts: 197
Likes: 0
From: D.C.
^+1

I am using ROM 97140015 and would prefer not to use Tephra's V5. Can someone just provide the "new RAM address for the rear O2 ADC input" for ROM 97140015. Someone has to know what it is since it is included in Tephra's patch.

<table name="Rear O2 (ADC 0A) RAM variable" category="Rear_02" address="????" type="1D" level="1" scaling="Hex16"/>

Last edited by DCsleeper; May 5, 2008 at 05:37 AM.
Reply
Old May 5, 2008 | 05:11 AM
  #43  
tephra's Avatar
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
Originally Posted by DCsleeper
prefer not to use Tephra's V5
aww why not?
Reply
Old May 5, 2008 | 05:37 AM
  #44  
DCsleeper's Avatar
Evolving Member
iTrader: (11)
 
Joined: Apr 2004
Posts: 197
Likes: 0
From: D.C.
sorry man. no hard feelings, I really appreciate the work that you and MrFred do on here. The major issue that I have is that I can not be sure which tables the tuner I had tune my car previously manipulated. It is possible that he modified tables that I cannot see in my version of ECUFlash.
Reply
Old May 5, 2008 | 05:57 AM
  #45  
tephra's Avatar
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
anything is possible

if you want send me your ROM and I can tell your what tables they modified
Reply

Thread Tools
Search this Thread

All times are GMT -7. The time now is 09:41 AM.