I got it done and it has not come back. it has been one full day of driving

Thanx MRFRED

 

You added the code to your xml file in the correct place? If you close and open ecuflash there should be no reason that it doesn't show.

 

this is how i have my code added to xml. I also have the rear o2 delete sim and it worked fine.

<table name="Rear 02 Sim Subroutine" category="Rear_02" address="3fd70" type="3D" level="1" scaling="Hex16">
<table name="Code" type="Static X Axis" elements="1" scaling="Hex16">
<data>Hex16</data>
</table>
<table name="Address" type="Static Y Axis" elements="20">
<data>3FD70</data>
<data>3FD72</data>
<data>3FD74</data>
<data>3FD76</data>
<data>3FD78</data>
<data>3FD7A</data>
<data>3FD7C</data>
<data>3FD7E</data>
<data>3FD80</data>
<data>3FD82</data>
<data>3FD84</data>
<data>3FD86</data>
<data>3FD88</data>
<data>3FD8A</data>
<data>3FD8C</data>
<data>3FD8E</data>
<data>3FD90</data>
<data>3FD92</data>
<data>3FD94</data>
<data>3FD96</data>
</table>

<table name="ECU Periphery2" category="ECUPeriphery" address="fca" type="1D" level="1" scaling="Hex16"/>

</table>
</rom>

 

The periphery2 entry needs to be on a new line after that last </table> value.

 

wait how should i have it? like that?

<data>3FD90</data>
<data>3FD92</data>
<data>3FD94</data>
<data>3FD96</data>
</table>

<table>
name="ECU Periphery2" category="ECUPeriphery" address="fca" type="1D" level="1" scaling="Hex16"/>

</table>
</rom>

 

sweet baby jesus i got it. thanks mrfred!

 

Screw Obama mrfred for president. I drive 40 miles to work, and yesterday it would studder about every 3 minutes. This seems to have fixed it. Thanks

 

this wouldn't fix a sputtering problem.

 

I believe it would since the reason why it sputters is from the ecu throwing the code itself.

 

I have the p0300 code on and don't get sputtering...so naturally I assume he has/had another issue and is mistakenly attributing the fix to this change.

 

Whenever my car threw the P0300 on the 94170008 ROM it would go into a sputtering failsafe mode that would reset as soon as I let completely off the throttle. On the 94170015 ROM it doesn't seem to have the same effect. I assume the '05 ROM would be similar to 94170015.

-Paul

 

Definatly works! I usually get the code on 10 minute drives. I've been driving the car for a week and a half and no light! Thanks so much!

 

My car (2004 rs) also threw this code on the highway as the car sputtered. Since it only threw it on the highway I could clear it and not have it for a while if I did normal city driving. When I installed some gsc 280 cams the light was constantly on.

I was hoping this would fix the sputtering issue as I want to get into another evo soon if this is no longer a problem!

 

I also noticed a slight hickup before the 2nd "SES" light triggering code came on.

 

So has your car stopped hiccuping?