help reading rom
#31
Evolved Member
Deepden posted the zip file a couple of posts up. You need to down load that, then unzip the two files, tyhe xml goes in your C:\Program Files\OpenECU\EcuFlash\rommetadata\mitsubishi\evo The hex file can go where ever you keep your hex files
Not being funny, but if you're having trouble with this operation, maybe you should wait a bit before tuning your car yourself and just get comfortable with using the programs.
MB
Not being funny, but if you're having trouble with this operation, maybe you should wait a bit before tuning your car yourself and just get comfortable with using the programs.
MB
#32
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Forever with BIG
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
problem is when ever i extract a downloaded file there is only ever 1 file in it? not 2
tuning the car i have no problem with ive spent many hours tunning with microtechs etc. i just cant read my rom image or do anything with ecuflash
tuning the car i have no problem with ive spent many hours tunning with microtechs etc. i just cant read my rom image or do anything with ecuflash
#40
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Forever with BIG
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
ok i have moved the xml file to that directory and just left the other on my desktop, but when i open ecuflash and then hit the "open rom" it directs me to the evo folder but there is nothing there?? yet if i manually go to that directory there is heaps of .xml files of all sorts of rom id numbers???
#44
Evolved Member
iTrader: (30)
Join Date: Dec 2003
Location: USA
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
You need to point that to the ROM or hex file. You are looking at the xml files in the evo folder. Make sure the xml file of your rom is in the evo folder. For the hex file, even though it points you to the evo folder, you need to point it to where you stored the hex folder. Make sense.
#45
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Forever with BIG
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
ok i point it to my hex file that i left on my desktop and try to open it and it gives me the "unknown rom image ecuflash could not recognize the rom image using any of the current definitions" and then 2 options= abort or use wizard to create new definition???