Not sure if i can say this or not but here we go i had a 35r on my car and just changed to a stock 9 turbo... i have basic mods exhaust intercooler intake. I also have a mild cam like a 264 and 680 injectors does anyone have a rough tune i can get... my buddy has the program and the cable to put it in my ecu...

please help if you can and thanks!

 

Bump please help.....

 

No one's posting because this is a BAD idea. there's no such thing as a 'base map' Log the car, read the 'how to tune an evo' thread that's stickied here. Make sure your boost is not too high, narrowband are a solid .90 or higher, and timing is not too high. If it knocks, add fuel (make the numbers in the map lower) and remove a tick or two of timing. If you were tuned for the 35r I'm guessing you'll prolly just have to touch up your tune a bit and call it good. If you see anything over 3 counts of knock, it's too much.

 

There alot of tuners on the website. Pay for it.

 

i would not mind paying for it... give me asuggestion as to who to look to sort new here... sorry if i came across as free loader i jsut do not want to send ecu off ....

 

4WS@4WSTuning

Mellon

TTP

 

www.4wstuning.com

 

The ONLY way to tune the car for a change like that is with datalogs (AFR, knock, airflow and rpm required).

 

your in south carolina right...well if you want a good tune a decent price go to the fayetteville/ft bragg/hickory/POPE AFB/Raleigh thread we have an amazing tuner and we have a mustang dyno in fayetteville.

https://www.evolutionm.net/forums/so...leigh-989.html

 

^^There you go^^

If near chas you can have Collin tune it for ya (showzone). I would tune it free (no dyno) if you already have an LC1 installed.

 

There you go man. Road tuning is the way to go