i have a JDM 2006 Evo IX.

i recently started tuning and now i cannot get the map switch to work with the I/C switch for some reason. every time i switch i see it light up but nothing happens i get basically the same response as on the normal map.

i changed from my JDM ROM to ROM id - 88580014.

not sure why this happens but my stationary rev limit does not work either.

i am hoping its not a problem presented by JDM IXs, my friend has a JDM VIII MR and it works fine through the I/C spray though.

any ideas?

Thanks in advance

 

does the ics spray lamp flash?

what is your activation time for autoics?

 

lamp does not flash just comes on and stays on.

time for alt map switch is set to 1500ms.

BTW sorry to hear about your car, at least your in one piece!

 

ok.

what have you got as your "altmap master enable" in the tephramod options?

edit - thanks still dunno whats happening, but its looking more and more like a writeoff

 

bro, i have no clue what that is. all i am seeing are the following -

alt map time to activate
alt map load threshold
alternate map ADC0F threshold
and the other normal stuff like igition, octane, WGDC and BDEL.

dont worry when you get back YOUR evo or A evo you will be happier.

just dont buy an STI

 

in the main tephramod options box (the one with all the 1's and 0's)

 

on the main tephramod options it has the following:

Enable Alternate Map Masters? ADC0F=1? AutoICS=2 i have it set at 2.

i tried 1 and nothing happened.

would you like a picture of my rom showing the Alt Map settings?

 

shouldn't it be ADC0F=0? AutoICS=1

???

What version do you have? V5?

 

yup V5, rom id = 88580014!

thats y i am asking for help

 

Mines the same as his and I run 5.10.

 

^^ does yours work.

i hope its not the whole JDM thingy!

 

no 1 and 2 respectively

 

0 = disable for either mode

1 = Enable for ADCOF

2 = Enable for AutoICS

 

i gathered as much, but still now working lol.

 

I was clearing that up for others...

-E