EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
ECU Flash

fuel map

Thread Tools
 
Search this Thread
 
Old Mar 13, 2009 | 03:51 AM
Share
  #1  
leecavturbo's Avatar
leecavturbo
Thread Starter
Evolved Member
 
Joined: Mar 2008
Posts: 1,392
Likes: 2
From: uk
fuel map
according to a few my map is not stock however in places it is.
it would appear that in the high load area it is so why would mitsi
richen between 3k and 5k ?
Reply
0
Old Mar 13, 2009 | 04:45 AM
Share
  #2  
Appauldd's Avatar
Appauldd
Evolved Member
iTrader: (22)
 
Joined: Nov 2003
Posts: 2,408
Likes: 7
From: Northern KY near Cincy
This could be to take into affect that is the highest load areas when at full throttle. Also, it could be to compensate for the lean spool tables.
Reply
0
Old Mar 13, 2009 | 05:05 AM
Share
  #3  
leecavturbo's Avatar
leecavturbo
Thread Starter
Evolved Member
 
Joined: Mar 2008
Posts: 1,392
Likes: 2
From: uk
Originally Posted by Appauldd
This could be to take into affect that is the highest load areas when at full throttle. Also, it could be to compensate for the lean spool tables.
ok thanks. when logging my wideband logs follow my map implicitly!
?
i.e if at load cell 240/4500 afr map is 11.2 that is what my afr actually is reported to be.
?
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mivec map advice
Burnhad91
Evo X Engine Management / Tuning Forums
8
Feb 11, 2019 11:13 AM
phantom or real part throttle knock (stroker)
EvolutionEst
ECU Flash
3
Oct 12, 2010 05:05 PM
Don't forget to look at your low octane fuel map!
spdracerut
ECU Flash
6
Feb 16, 2007 08:26 AM
Lift throttle knock
spdracerut
General Engine Management / Tuning Forum
4
Jan 14, 2007 12:51 AM
Proper Way To Lean Or Richen Afr?
Dus10
ECU Flash
20
Oct 11, 2006 09:54 PM
Tags
Back to Subforum
ECU Flash
View Next Unread
EvoScan 2.5 and VISTA..HELP...




Advanced Search

All times are GMT -7. The time now is 09:36 PM.