SpoolinUp SD plug-n-play harness development
#422
Right thanks for coming back to me on that one. So as i run ECU TEK on my current IX ecu next week when i get the SD Map will it involve altering the wiring loom? and by doing this i wouldn't be able to swap back to the ECU TEK without wiring modification?
#423
can be done by someone or use this plug and play harness
its a shame spoolinup doesn't make a jdm evo 8 harness to pick up a map sensor too
i just want the plug will make up my own jdm evo 8 loom
Last edited by leecavturbo; Nov 15, 2010 at 01:54 AM.
#425
addo you don't need any wiring mods as you have a ix which has a map sensor already all you need a temp sensor fitting and some way to connect it to the ecu
can be done by someone or use this plug and play harness
its a shame spoolinup doesn't make a evo 8 harness to pick up a map sensor too
i just want the plug will make up my own jdm evo 8 loom
can be done by someone or use this plug and play harness
its a shame spoolinup doesn't make a evo 8 harness to pick up a map sensor too
i just want the plug will make up my own jdm evo 8 loom
#426
#434
Silver Sponsor
iTrader: (57)
Back from the grave with good news....FINALLY.
Custom molded (rejected the first mold, this is the second mold), PA66 plastic, tin coated terminals (not pictured). Should have units ready to ship within 1.5-2 weeks.
Got tons of people on an "unofficial" wait list, but now that I actually have some good news I started a wait list. Go to http://spoolinup.com/sd.html and fill the simple form out. You will be notified the second they are available.
The harness will be $109 alone and $119 with IAT. The connector will be available separate too for the DIYers for roughly $20, custom molds aren't cheap! If anyone wants to start a group buy I'll do 15 harnesses for $89.99 e/a.
I'm also carrying ECU Pins for 8's and 9's!
Time to get ready for snowboarding!
Edit: How can I make this work with a MAP for the EDM/JDM guys?
Custom molded (rejected the first mold, this is the second mold), PA66 plastic, tin coated terminals (not pictured). Should have units ready to ship within 1.5-2 weeks.
Got tons of people on an "unofficial" wait list, but now that I actually have some good news I started a wait list. Go to http://spoolinup.com/sd.html and fill the simple form out. You will be notified the second they are available.
The harness will be $109 alone and $119 with IAT. The connector will be available separate too for the DIYers for roughly $20, custom molds aren't cheap! If anyone wants to start a group buy I'll do 15 harnesses for $89.99 e/a.
I'm also carrying ECU Pins for 8's and 9's!
Time to get ready for snowboarding!
Edit: How can I make this work with a MAP for the EDM/JDM guys?
Last edited by SpoolinUp; Jan 21, 2011 at 04:18 AM.