Yup!

 

one more too

1. bigric09 (jsnrchtr@aol.com) x3
2. tscompusa (tscompusa@gmail.com)
3. stikiller214 (Dadon6985@yahoo.com)
4. EvoooB (BJC2479@aol.com)
5. tim at motionlabtuning.com
6. Evoryder (sk8tull@yahoo.com)
7. Murderedevo256(jjones256@hotmail.com)
8. Dyrexion(merchantmael@gmail.com)
9. Positron (julius@teknagen.com)
10. roger smith (arthursan@rockfoos.com)
11.Turbo01s2k(aedwardsix@gmail.com)
12. Skylineracer (skylineracer@gmail.com
13. steadly2004 (steadly2004@yahoo.com)
14. EVOVIII-WC (nehpets@hotmail.com)
15. Monochrome (monochrome@w3si.org)
16. psphinx81 (psphinx81@gmail.com)
17. Joemflsxe (joe.j.mckinney@gmail.com)
18. Socalredline (socalredline@gmail.com)
19. And (shaw__andy'at'hotmail.com)

thanks

 

Matt, looks good. I saw that you shipped out the second prototype to me. I'll be in town to test it out on Monday/Tuesday.

 

The baro is enroute albeit very rough! Pm me, I need to let you know which color is the +,-,signal.
Also threw in some injector clips for ya.

 

spoolinup= amazing products! probably gonna pick up a cop kit when I get this!

 

Damn, apparently this was what was keeping a lot of guys from going over to SD?

It's stupid easy to wire up the IAT, but hey, what ever makes it even easier.

 

im already setup for SD... this just makes the install cleaner and lets the next option be easier to use.

 

Sorry if I haven't read a post somewhere in your development of the Version 2 w/ baro that has the answer to this...

... instead of using a separate barometric sensor, is it possible to use an absolute pressure sensor for manifold pressure? Or is the resolution just not good enough to only go off the manifold pressure?

 

1. bigric09 (jsnrchtr@aol.com) x3
2. tscompusa (tscompusa@gmail.com)
3. stikiller214 (Dadon6985@yahoo.com)
4. EvoooB (BJC2479@aol.com)
5. tim at motionlabtuning.com
6. Evoryder (sk8tull@yahoo.com)
7. Murderedevo256(jjones256@hotmail.com)
8. Dyrexion(merchantmael@gmail.com)
9. Positron (julius@teknagen.com)
10. roger smith (arthursan@rockfoos.com)
11.Turbo01s2k(aedwardsix@gmail.com)
12. Skylineracer (skylineracer@gmail.com
13. steadly2004 (steadly2004@yahoo.com)
14. EVOVIII-WC (nehpets@hotmail.com)
15. Monochrome (monochrome@w3si.org)
16. psphinx81 (psphinx81@gmail.com)
17. Joemflsxe (joe.j.mckinney@gmail.com)
18. Socalredline (socalredline@gmail.com)
19. And (shaw__andy'at'hotmail.com)
20.kyle (slowixrs@aol.com)

 

For our purposes, absolute and baro are the same.

 

my paypal is waiting! lolol

 

So the barometric pressure is not being used in the calculation of pressure at the manifold. Where are you using it? Is it to adjust for the density of oxygen at different altitudes?

 

1. bigric09 (jsnrchtr@aol.com) x4
2. tscompusa (tscompusa@gmail.com)
3. stikiller214 (Dadon6985@yahoo.com)
4. EvoooB (BJC2479@aol.com)
5. tim at motionlabtuning.com
6. Evoryder (sk8tull@yahoo.com)
7. Murderedevo256(jjones256@hotmail.com)
8. Dyrexion(merchantmael@gmail.com)
9. Positron (julius@teknagen.com)
10. roger smith (arthursan@rockfoos.com)
11.Turbo01s2k(aedwardsix@gmail.com)
12. Skylineracer (skylineracer@gmail.com
13. steadly2004 (steadly2004@yahoo.com)
14. EVOVIII-WC (nehpets@hotmail.com)
15. Monochrome (monochrome@w3si.org)
16. psphinx81 (psphinx81@gmail.com)
17. Joemflsxe (joe.j.mckinney@gmail.com)
18. Socalredline (socalredline@gmail.com)
19. And (shaw__andy'at'hotmail.com)
20.kyle (slowixrs@aol.com)

First batch.... Ready Go !!

 

Maybe I missed it, but how much are you projecting is going to be the cost for this harness? Will it include the sensors we need?

 

Will be under $100 for harness and about $30 for the baro.