So, my car was flashed back in Jan with a valet map and shipped to me out here in Korea.

Same cable (1.3u), same laptop (HP mini with XP), same version EcuFlash, now doesn't want to flash back to my normal map (or anything else for that matter), also won't read from ECU. EvoScan works fine.

Any ideas?

Here's the error code from EcuFlash:

[08:13:29.843] 88590015 (88 tables) inheriting evo9base_20081101 (135 tables)
[08:13:29.906] 524288 byte image read.
[08:13:32.187] Using interface OpenPort 1.3 Universal TX2989Eo17cef6d5472e45b257fad2b58b7d0fe07ca53804
[08:13:40.875] sending init sequence 1 (0001)
[08:13:44.125] sending init sequence 1 (0003)
[08:13:47.359] sending init sequence 1 (FFFF)
[08:13:50.078] no response to any known code
[08:13:50.078] interface close

Tony (can't rev past 3500rpm, is sad in the pants)

 

Bump... anybody?

 

NVM... problem solved.

I originally tried the three fixes posted in the stickied thread to no avail. Ended up having to flash the car while it was running. Took several attempts to do this also... first time it started flashing but stopped at about 65% and said to restart the flash to complete it. Tried several more times until it finally finished the rest of the flash.

Pain in the ***, but it works.