I need adress for stationary rev limit
i have 5467a and it's wrong

 

53442

 

thx!!!

 

No 2010 MR owners want to test for me???

 

i do, but i dont know what im doing!

 

If no one else speaks up, I know a car that I could test it on. He currently runs a Cobb AP... but I could flash him long enough to make sure it works.

... so if nobody tests it this week, I'll see what I can do next.

 

Hey, I'd been waiting today for a looong term!!

Finally I could install this awesome mod. It works fine!!

I'm going to track my car within several days. I'm very happy I can switch Golden's 2 tunes by your awesome MOD!!

so many thanks to tephra!!

Cheers!

 

Just donated to both Tephra and Golden, keep up the awesome work guys!

 

2011 usdm gsr in the near future?

 

is mode 23 installed when using TephraXMOD V1? or will I still need to install mode 23 first?

 

I include mode23 already in the TephraXMOD ROM's...

 

Send it to me. I'll test it in the next 2010 I tune, wich should be in 2 weeks.

 

If you want a test car still we have a 2010 usdm California evo mr available

 

hi,

i have meth and planning to use that map switching in post#2. now, i'm a complete noob at these ohm resistors ~250 ohm resistor is what in post#2..but when i was about to purchase, i saw 1/8w 250 ohm resistor, 1/4w 250 ohm resistor, and/or 1/2 w 250 ohm resistor. could you guys let me know which one? thanks!

 

Incredible! Shouldn't matter too much, there isn't much current passing through it. The 1/2 W will have beefier leads so that may be better, but it might also dissipate more heat.