Speed Density 2.0 (3D VE Tables, Baro)
#302
Evolving Member
iTrader: (3)
Clearly some people are having trouble grasping this relatively simple patch so i'll just draw it out for them picture are worth a thousand words right?
As you should be able to tell the Map volts vs kpa should always be 1:1 so you don't screw up the other table axis. What will happen is you'll measure 40kpa or something and it wont match to the point on the table because its not aligned.
If you want to effect load you do that with the kPA vs Load table while this should have been obvious I guess its not.
As you should be able to tell the Map volts vs kpa should always be 1:1 so you don't screw up the other table axis. What will happen is you'll measure 40kpa or something and it wont match to the point on the table because its not aligned.
If you want to effect load you do that with the kPA vs Load table while this should have been obvious I guess its not.
The link for the above is corrupted, could you check it please.
#303
https://www.evolutionm.net/forums/at...d-94172715.zip
The link for the above is corrupted, could you check it please.
The link for the above is corrupted, could you check it please.
It will be late in the day tomorrow when i get back from work so please stay tuned
#305
Evolving Member
iTrader: (3)
I think tomarrow what I'll do is post the roms directly to the site unzipped so we don't have this issue anymore. Thankfully the forum admins have recently allowed large direct posting of rom images.
It will be late in the day tomorrow when i get back from work so please stay tuned
It will be late in the day tomorrow when i get back from work so please stay tuned
#306
Ok posted all the links again on page #1
https://www.evolutionm.net/forums/9050038-post1.html
Now the bin files are direct downloads but the xml files still need to be zipped hopefully it will be ok with just just 1 file in it though.
https://www.evolutionm.net/forums/9050038-post1.html
Now the bin files are direct downloads but the xml files still need to be zipped hopefully it will be ok with just just 1 file in it though.
#310
Evolved Member
iTrader: (3)
I test it ! Much better mabye some jitter at 2000-2100 rpm sometimes
Update : I went an other 50km with the 9653 3d sd rom and I can say it is liveable ! I had 5x jitter and only at 2100 rpm part throttle 4th and 5th gear acceleration . The warmup table like Golruss posted, and all of the jitter fixes turned on .
Last edited by VGergo; Apr 26, 2011 at 01:07 PM.
#312
Evolving Member
iTrader: (3)
I test it ! Much better mabye some jitter at 2000-2100 rpm sometimes
Update : I went an other 50km with the 9653 3d sd rom and I can say it is liveable ! I had 5x jitter and only at 2100 rpm part throttle 4th and 5th gear acceleration . The warmup table like Golruss posted, and all of the jitter fixes turned on .
Update : I went an other 50km with the 9653 3d sd rom and I can say it is liveable ! I had 5x jitter and only at 2100 rpm part throttle 4th and 5th gear acceleration . The warmup table like Golruss posted, and all of the jitter fixes turned on .
thanks again RoadSpike