Right since my work is an extension of the other roms it assumes you have the rest of the xmls from the previous roms. Here's a link to them.

http://www.norcalmotorsports.org/use...OD-XMLPack.zip

 

Ok, cool. I was running the r3compile version, so I guess I need to specifically run those in order for this to work correctly? And then just add my own little specific xml extensions that I have.

 

Yep that should work.

 

That worked, thank you very much.

 

very cool rom I would try the 9653 with 4 omni map. With the base volt map and map kpa table and the omni 4 bar map only need to tune the 3d ve table ? Or suggested to change the values in the map load table too ? 2.0 liter evo9 turbo engine with hks 264cams

 

RoadSpike

I loaded the rom today and the car idled great a little lean but really good still and it drives great. The only thing that I am noticing is that during cruise there is a slight stutter. It is not consistent but it happens frequently enough to notice. This happens at freeway speeds and also during in town cruise speeds. I haven't started to make all of the adjustments yet but I thought I would ask about it

 

Did you try the stutter fixes in the rom?

 

Yeah I added that fix. I may need to make some more adjustment in the tune. Its pretty stock from how you created it. I'll dig around the rom some more.

 

Any insights as to what conditions cause the stutter will help me find out whats happening too.

 

between 2k-2.5k slight throttle maybe 25-30%.

 

That sounds very similiar to the conditions in the original stutter problems hmm.

 

I concur with 3gEclipseTurbo, I had the GF tell me what my throttle percentage was when i was at cruise but mine will happen between 2-3k and isn't speed dependent.

 

It did happen at 2.6k one time. It seems just like the original Stutter problem but the fix options dont work for it.


Emailed you btw RoadSpike

 

I'll see what i can do about it may take awhile to find the culprit though

 

About the stutter thing I found this table which is implemented to modify the load when the rpm is above 2000rpm and it has two very odd entries in it. At the end at loads 140-160 it totally cuts out the fuel.