Hello guys, im again here with a question

my 1 byte logging is showing wrong values at wot. Attached is the logs,

i checked my mut tables (Mut41 value is 840B) and they are true, also evoscan formula is 1.2 .

What could be the problem ? Thanks for any help

 

Which Tephra rom are you using?

 

88592715 on edm evo 9

 

Does 2byte load log correctly?

 

I didnt log 2 byte so i don't know if it is logging correctly

 

Well give it a try.

 

Okay, ill give it a try and post the results,

any reasons why 1 byte is logging wrong values?

 

I dont have any ideas yet. Thats why I would like to see what 2byte load says.

 

okay, will post the logs as soon as i log 2 byte.

Thank you

 

Adjusted my mut tables and logged 2 byte load today,

2 byte is showing very high values, goes up to 350 as seen in logs.

Any helps? What can be done ?

 

You need a higher 1byte factor. That is your issues. Raise it to 1.5 in your ROM AND in EvoScan.

 

should i have to change the "2 byte to 1 byte load factor" in my rom ?

 

Yep, in the ROM and in the formula for "1byte Load" in EVOScan.

 

changed those factors to 1.5 and here is a 3rd gear wot log. 22 psi peak boost but again very high values for load.

 

Looks correct now.

Dont worry about how much load you have.

If its too much for your tables, then rescale your load axis or move to Tephra V7 with BIGMAPS.

Now you can log just 1byte load.