Hi guys,

Probably this have been covered before but trust me, i searched and found nothing.

i need some help with boost control on 52680017 rom (inherits from 52680015). I enabled mode23 logging so i get nice log readings. The problem is when i try to control boost. it keeps spiking up to 2 bar and holding at least 1.8 to redline (readings on a boost gauge).

Theese are the tables i get with my rom:



I even tried lowering duty cycles and boost targets to zero! and does the same thing!
I double checked solenoid connections so no problem down there.
Seems theres no effect when changing values on any table!

Am i missing something?

Regards.

 

come on!! no one????

 

Could you post the stock ROM and XML you're using. Could be that its improperly defined and you're not changing anything

 

Sure.
XML
http://www.datafilehost.com/d/6f8537fc

Rom
http://www.datafilehost.com/d/adc98052

to download, uncheck box "Use our download manager and get recommended downloads" and you'll get a download button.


Internal ID is 52680017 but inherits from 52680015

Regards.

 

What's up got boost??

I looked at your rom. I see this when the boost controller is not hooked up right. Do you have a 3 port or stock? Hoses could have gotten crossed by accident. Post up a log of a pull with the 2 bar spike.

 

Nope, stock boost solenoid. Hose being crossed is very possibly cause someone messed up there before.
I'll check that first and post a log.

Regards.