EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
ECU Flash

High load figures, is this normal?

Thread Tools
 
Search this Thread
 
Old Mar 7, 2018 | 12:14 AM
Share
  #1  
TariqEvo's Avatar
TariqEvo
Thread Starter
Evolving Member
 
Joined: Dec 2013
Posts: 281
Likes: 7
From: Kenya
Question High load figures, is this normal?
So my car is basically a stock 2003 evo viii GSR, exhaust and an intake only
the map has upto 260 load, but logs show upto 340 load,

Now I know I can rescale the load values on the map or use tephras big map,
But is it normal for a near stock car to have 340 load??
PS: I am running a hallman mbc at 23psi
Reply
0
Old Mar 7, 2018 | 01:41 AM
Share
  #2  
foxbat's Avatar
foxbat
Evolved Member
 
Joined: Oct 2009
Posts: 926
Likes: 15
From: UAE
Are running MAF or MAP? It's likely a boost leak.
Reply
0
Old Mar 7, 2018 | 02:54 AM
Share
  #3  
TariqEvo's Avatar
TariqEvo
Thread Starter
Evolving Member
 
Joined: Dec 2013
Posts: 281
Likes: 7
From: Kenya
Originally Posted by foxbat
Are running MAF or MAP? It's likely a boost leak.
MAF, there is no boost leak in my car, last leak was at the throttle body shaft seals which i replaced,

zero boost leaks now
Reply
0
Old Mar 7, 2018 | 04:41 AM
Share
  #4  
foxbat's Avatar
foxbat
Evolved Member
 
Joined: Oct 2009
Posts: 926
Likes: 15
From: UAE
What load parameter are you logging 1byte, 2byte?
Are you using the stock MAF housing?
Reply
0
Old Mar 7, 2018 | 06:20 AM
Share
  #5  
400s's Avatar
400s
Newbie
 
Joined: Mar 2014
Posts: 73
Likes: 6
From: C
Boost leak...

maf is showing 340 load and if the boost gauge is tapped from the intake manifold and is only showing 23 psi then definitely it’s a boost leak.
Reply
0
Old Mar 9, 2018 | 01:10 AM
Share
  #6  
TariqEvo's Avatar
TariqEvo
Thread Starter
Evolving Member
 
Joined: Dec 2013
Posts: 281
Likes: 7
From: Kenya
Update
Did a boost leak test, found some boost leaks, fixed all of them, car holds boost properly, but logging still brings high load figures, whether using 1b or 2b

still need help
Reply
0
Old Mar 9, 2018 | 03:04 AM
Share
  #7  
400s's Avatar
400s
Newbie
 
Joined: Mar 2014
Posts: 73
Likes: 6
From: C
Post your rom and a log here....
Reply
0

Trending Topics

Old Mar 9, 2018 | 10:27 AM
Share
  #8  
TariqEvo's Avatar
TariqEvo
Thread Starter
Evolving Member
 
Joined: Dec 2013
Posts: 281
Likes: 7
From: Kenya
I have attached the final log and the best possible adjustment of my rom
Reply
0
Old Mar 9, 2018 | 10:28 AM
Share
  #9  
TariqEvo's Avatar
TariqEvo
Thread Starter
Evolving Member
 
Joined: Dec 2013
Posts: 281
Likes: 7
From: Kenya
I have attached a log and my rom to this post
Attached Files
File Type: xlsx
08032018FinalLog.xlsx (22.4 KB, 0 views)
File Type: bin
FinalMap09032018.bin (256.0 KB, 0 views)
Reply
0
Old Mar 9, 2018 | 01:12 PM
Share
  #10  
foxbat's Avatar
foxbat
Evolved Member
 
Joined: Oct 2009
Posts: 926
Likes: 15
From: UAE
Can you post a copy of your XML
What kind of fuel are using? Timing numbers are low! Load readings don't look right, they are either too high or too low. Must be a definition issue.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
High Load Figures, 368!?
TariqEvo
ECU Flash
14
Jul 26, 2018 09:13 AM
High Load Figures, 340!
TariqEvo
Evo Dyno Tuning / Results
10
Jul 10, 2018 06:16 AM
Load 1byte falling under high load?
blackevolution8
ECU Flash
3
Sep 14, 2011 04:20 AM
Why is my 1 byte load so high compared to baro+temp compensated 2byte load?
Fast_Freddie
ECU Flash
4
Apr 16, 2011 05:15 AM
High load issue with normal boost
ethan169
Evo Engine / Turbo / Drivetrain
23
Jul 17, 2008 07:18 AM
Tags
Back to Subforum
ECU Flash
View Next Unread
Unknown ROM on JDM Evo 8 GSR




Advanced Search

All times are GMT -7. The time now is 07:16 AM.