MDP questions? ?
Jan 21, 2009, 09:49 PM
#16
just logged the MDP:
meh i guess it works lol.
one of the reasons i'm late/don't post logs/code all the time is the BS i went through to make this all align up.
Code:
TPS Load RPM AirFl MDP MAP_EM MAFS_REAL 14.51 43.44 1000.00 49.34 28.64 135.53 22.11 14.51 42.81 1000.00 51.20 28.25 134.74 22.51 14.51 41.56 1000.00 49.14 28.44 134.74 22.80 14.51 42.19 976.56 46.78 28.25 134.74 22.41 14.51 42.50 976.56 50.03 28.64 135.53 25.45 47.06 48.13 1007.81 100.05 47.21 198.92 51.50 100.00 106.88 1378.91 192.24 46.82 200.49 55.82 100.00 107.19 1898.44 235.29 46.44 192.63 44.32 14.51 68.44 2542.97 168.65 26.12 147.32 17.79 14.51 33.44 2640.63 76.46 17.80 108.90 14.55 14.51 27.19 2515.63 99.36 15.87 101.82 12.38 14.51 23.13 2320.31 59.07 15.28 76.66 12.38 14.51 23.44 2136.72 56.71 15.48 101.03 11.40 14.51 22.50 1972.66 51.99 16.06 103.39 12.38 14.51 23.75 1808.59 49.14 16.64 104.96 13.76 14.51 26.56 1707.03 51.01 17.22 107.32 14.45 14.51 27.50 1589.84 51.70 17.99 110.47 15.33 14.51 30.00 1480.47 52.68 19.35 112.83 17.10 14.51 33.13 1378.91 56.51 20.32 115.09 20.34 14.51 39.69 1304.69 62.70 21.86 117.45 21.92 14.51 40.63 1238.28 61.43 22.64 119.80 24.87 14.51 47.81 1144.53 64.87 23.99 121.38 27.32 14.51 52.81 1007.81 62.02 25.93 126.88 29.48 14.51 56.88 914.06 61.23 27.67 133.17 30.37 14.51 57.81 957.03 64.37 28.64 135.53 31.45 14.51 59.69 847.66 59.46 30.57 141.72 34.10 14.51 64.69 832.03 62.31 31.15 144.87 35.38 14.51 66.88 808.59 63.00 32.31 148.80 34.60 14.51 65.63 871.09 65.75 31.73 145.65 33.02 14.51 62.19 957.03 67.91 31.15 144.87 32.73 14.51 61.56 933.59 66.14 30.96 142.51 29.58 14.51 55.94 980.47 62.51 29.99 140.94 30.07
one of the reasons i'm late/don't post logs/code all the time is the BS i went through to make this all align up.
Jan 21, 2009, 10:08 PM
#20
OT: thats how the map to maf values look when logged correctly. notice that the MAF is being used the whole time for this log as the value is always lower.
Jan 22, 2009, 08:03 AM
#21
The proper eval in evoscan for the JDM MAP is
(obviously replace 14.3 with whatever you standard ATM is
Considering the JDM MAP is a 3 bar and stock is 1 bar, I'd assume
should get you pretty close. Then just log with the car off if you know your standard ATM and you should be able to adjust the multiplier accordingly...
Obviously please post the results if you get them.
If that doesn't help maybe looking at MRfred's "log a JDM map" thread can help. You could take a look at some of the values in the tables there to see if you are close.
Code:
0.19347*x-14.3
Considering the JDM MAP is a 3 bar and stock is 1 bar, I'd assume
Code:
0.19347 / 3 * x - 14.3
Obviously please post the results if you get them.
If that doesn't help maybe looking at MRfred's "log a JDM map" thread can help. You could take a look at some of the values in the tables there to see if you are close.
Jan 22, 2009, 12:08 PM
#22
This should be a little closer:
Code:
0.36*0.19347*x - 14.5
Jan 22, 2009, 08:21 PM
#23
Evolved Member
Thread Starter
iTrader: (22)
Join Date: Nov 2003
Location: Northern KY near Cincy
Posts: 2,408
Likes: 0
Received 6 Likes
on
6 Posts
I adjusted Boost (MDP) in EvoScan to this 0.36*0.19347*x - 14.3
What other settings need to be changed in EvoScan....i.e. Gauge Min and Max, and Chart Min and Max?
What other settings need to be changed in EvoScan....i.e. Gauge Min and Max, and Chart Min and Max?
Jan 22, 2009, 09:13 PM
#25
Evolved Member
Thread Starter
iTrader: (22)
Join Date: Nov 2003
Location: Northern KY near Cincy
Posts: 2,408
Likes: 0
Received 6 Likes
on
6 Posts
Cool Beans ! ! THANKS
I will get to logging. Hopefully I can get the MAP to MAF to solve idle problems with hard intake pipes and big cams.
I am close.....so close.
I will get to logging. Hopefully I can get the MAP to MAF to solve idle problems with hard intake pipes and big cams.
I am close.....so close.
Jan 26, 2009, 07:57 AM
#26
Evolved Member
Thread Starter
iTrader: (22)
Join Date: Nov 2003
Location: Northern KY near Cincy
Posts: 2,408
Likes: 0
Received 6 Likes
on
6 Posts
IT WORKS ! !
I can now log vacuum conditions and boost up to about 2.2 PSI. This will help to try and get MAP to MAF configurations correct for idle with big cams and hard turbo inlet pipes.
THANKS a ton ! !
I can now log vacuum conditions and boost up to about 2.2 PSI. This will help to try and get MAP to MAF configurations correct for idle with big cams and hard turbo inlet pipes.
THANKS a ton ! !
Thread
Thread Starter
Forum
Replies
Last Post
okevolutionVIII
Evo Engine / Turbo / Drivetrain
16
May 31, 2014 10:45 PM
CardShark
General Engine Management / Tuning Forum
3
Jul 29, 2011 12:35 AM
