I Would like to give everyone a good comparison of what a bone stock Evo 9 does on our Dyno Dynamics Dyno. Correction is always set to 1.0. Run done in 4th gear.



Now let's take another Evo 9. Add a full Tbe, forge mbc set to 23psi, intake, and a tune using Ecuflash.



+67whp +75wtq

Great gains and a strong running car. I think anyone would be satisfied with 50+whp/50+wtq gain in a very lightly modded Evo.

Take into consideration that our dyno reads really low. I will be posting many dyno sheets and these should be used as a reference to gains provided with new parts and tuning! Whether your car is making 290whp or 330whp with the same parts on different dynos, It is the gains that are important and the consistency in the results! Cheers!

 

224hp or ~165kw atw the wheels is basically the same as what a stock Evo 9 gets on a Dyno Dynamic here is Aus too.

 

291hp or 215kw is about what we get on a IX with Intake , 3" TBE and Tune too.

Good to know DD numbers from the USA can be used for comparison to our results.

 

I made 335whp and 335wtq on your dyno thats a 111whp and 125wtq gain on my ix with cams, licp, ic, tbe, intake, 25psi tune. Im feeling pretty good.

 

Yes, when you compare to honest dynodynamic setups

 

Yes, your car is a freak!

 

Not bad at all. I also happen to have a freak on my hands. Dynamics Dyno just as low reading as yours put down 316whp with tbe, perrin intake, ported im, mbe and a 24.5 psi tune

These dyno's are definitely heartbreakers.

 

What is the scoop with your build by the way?

 

People will start to understand how strong these cars actually are once I start pumping them out of here. It will be great when cars are trapping 125+ mph with 400whp on this dyno!