Tomei Arms Round 2!!!!!

Reply Subscribe

Thread Tools

Search this Thread

Dec 6, 2009 | 10:18 AM

#91

evodom1

Newbie

Joined: Aug 2008

Posts: 29

Likes: 0

From: UA

And the housing...

The last reply from my supplier was like this
"...tomei says the problem is in ECU..." actually I do not understand how ecutuner could make so thin the wall of housing

Dec 6, 2009 | 10:52 AM

#92

Aby@MIL.SPEC

Former Sponsor

iTrader: (161)

Joined: Jun 2003

Posts: 3,043

Likes: 13

From: San Elijo Hills, Ca.

I ported a tomei a several weeks ago & I noticed there are many "thin" spots within the hotside....I dont know the SN #'s of it.

Dec 6, 2009 | 11:53 AM

#93

evodom1

Newbie

Joined: Aug 2008

Posts: 29

Likes: 0

From: UA

both turbos were produced 09 06 10 xx - the only difference is in 2 last numbers in SN

Last edited by evodom1; Dec 6, 2009 at 11:59 AM.

Dec 6, 2009 | 03:12 PM

#94

aka.ralliart15

Evolved Member

iTrader: (20)

Joined: Jul 2007

Posts: 1,453

Likes: 0

From: Gator Nation(UF)

Quote:

Originally Posted by burnzy

any recent arms results?

My friend Shawn made 460whp on E85 with bolt-ons on a dynojet about a month and a half ago and a member in the florida forums made 395whp on 93 octane on a mustang dyno.

Dec 6, 2009 | 03:30 PM

#95

Peter10654

Evolving Member

iTrader: (1)

Joined: Jul 2005

Posts: 138

Likes: 0

From: Germany

@evodom1

I would contact TOMEI USA directly... I'm sure they know the issue with few of their turbos and will sort it out.

Peter

Dec 7, 2009 | 06:56 AM

#96

CBRD

Account Disabled

iTrader: (60)

Joined: Dec 2004

Posts: 7,363

Likes: 8

From: york, pa 17402

ouch!!

this is why we use the mitsu factory turbos to start with.

cb

Dec 7, 2009 | 07:10 AM

#97

Peter10654

Evolving Member

iTrader: (1)

Joined: Jul 2005

Posts: 138

Likes: 0

From: Germany

Quote:

Originally Posted by CBRD

ouch!!

this is why we use the mitsu factory turbos to start with.

cb

When is it available für the EVO X ??

Peter

Dec 7, 2009 | 07:54 AM

#98

Jorge T

Evolved Member

iTrader: (18)

Joined: May 2004

Posts: 1,494

Likes: 1

From: Houston, TX

Mine has failed too, I found out during thanksgiving holiday, vendor is being very helpful....but still waiting for the RMA from Tomei.
Ending serial # 26.

Attached Thumbnails

Tomei Arms Round 2!!!!!-smimg_0574-1-.jpg

Dec 7, 2009 | 08:22 AM

#99

Peter10654

Evolving Member

iTrader: (1)

Joined: Jul 2005

Posts: 138

Likes: 0

From: Germany

OUCH !! Now I'm a little bit scared !!!

Please tell us the correspondation with TOMEI... I'm very interesting in !!

Peter

Dec 7, 2009 | 06:22 PM

#100

burnzy

Evolving Member

iTrader: (1)

Joined: Jun 2007

Posts: 281

Likes: 0

From: Melbourne, Australia

oh my.. i'm going to have to check mine, jorge is yours one with tomei on the comp housing or an early one too?

Dec 7, 2009 | 06:32 PM

#101

burnzy

Evolving Member

iTrader: (1)

Joined: Jun 2007

Posts: 281

Likes: 0

From: Melbourne, Australia

mine seems fine but i haven't checked with a torch, made in 090104

Dec 7, 2009 | 06:38 PM

#102

Jorge T

Evolved Member

iTrader: (18)

Joined: May 2004

Posts: 1,494

Likes: 1

From: Houston, TX

tomei on the comp housing

Dec 7, 2009 | 06:44 PM

#103

dmotors

Evolving Member

iTrader: (3)

Joined: Jul 2006

Posts: 102

Likes: 0

From: bogota

I do not like that exhaust housing desing for tomei , the car also lost torque with that housing

Dec 7, 2009 | 06:45 PM

#104

burnzy

Evolving Member

iTrader: (1)

Joined: Jun 2007

Posts: 281

Likes: 0

From: Melbourne, Australia

isn't it almost identical to the normal housings?

Dec 7, 2009 | 06:55 PM

#105

dmotors

Evolving Member

iTrader: (3)

Joined: Jul 2006

Posts: 102

Likes: 0

From: bogota

it look identical but the a/r is different so for that reason the car feel so loose of torque

Reply Share

First
Prev
7 / 9
Next
Last