Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

My FP RED bolton IVEYTUNE

Thread Tools
 
Search this Thread
 
Old Oct 6, 2009 | 03:14 AM
  #76  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
you can just pull a few deg of timing and be safe prob...
Reply
Old Oct 6, 2009 | 04:43 AM
  #77  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
I also want to retract my original statement about E85 cold start..... I went out this morning at 5am when it was 30deg and the car fired right up......so cold starts are no problem.
Reply
Old Oct 6, 2009 | 06:09 AM
  #78  
RockmanX's Avatar
Evolved Member
iTrader: (78)
 
Joined: Aug 2008
Posts: 6,623
Likes: 4
From: Louisiana
Originally Posted by tscompusa
you know that youtube video i pulled the logs and the VDR only said 450/340tq (dynojet) so that was a detune because we pulled timing for a safe tune until i get built motor in my numbers in my sig were like 485/475 dynojet on VDR....... im not risking the core right now tho, thats like burning $1200 for fun. I'll have the 2.3 L in there in 2wks
2.3 in two weeks . where you get it and how much? no core im assuming unless you paid that hefty fine??? i thought you were waiting till next summer??
Reply
Old Oct 6, 2009 | 10:31 AM
  #79  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
Originally Posted by RockmanX
2.3 in two weeks . where you get it and how much? no core im assuming unless you paid that hefty fine??? i thought you were waiting till next summer??
I never said next summer.. wrong person. I only got tuned with the stock bottom end because I wanted to experience a taste of what I was about to get myself into, and now I see its all well worth it!

to answer your next question, my friend is giving me his core to send in so we dont have to strip my car until the last minute

Tom
Reply
Old Oct 6, 2009 | 11:31 AM
  #80  
RockmanX's Avatar
Evolved Member
iTrader: (78)
 
Joined: Aug 2008
Posts: 6,623
Likes: 4
From: Louisiana
3556k??? buschur 2.3???
Reply
Old Oct 6, 2009 | 03:21 PM
  #81  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
Originally Posted by RockmanX
3556k??? buschur 2.3???
buschur 2.3 stage 3 yes. with crower rods, je pistons. I was going to do pauter rods, but the new crower buschur uses seems to be just as strong.
Reply
Old Oct 6, 2009 | 03:35 PM
  #82  
Sean@Iveytune's Avatar
Former Sponsor
iTrader: (14)
 
Joined: Mar 2004
Posts: 1,849
Likes: 1
From: Linden, NJ
Originally Posted by MR. EVO MR
does this mean you would need two tunes, one for winter gas and another one when it warms up?
Pretty much yes.

Sean
Reply
Old Oct 6, 2009 | 04:24 PM
  #83  
Evo_Jay's Avatar
Evolved Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (17)
 
Joined: Jun 2005
Posts: 3,419
Likes: 14
From: Chico, CA (NOR-CAL)
Originally Posted by tscompusa
Ok i want to first respond and say i accidently had NLTS enabled on the rom sean tuned and thats what was causing my bog / hesitation..... in no way was it his tuning, because the car pulls like ****ing mad right now and clean shifts.......

I also want to say rom 96420008 is the biggest POS rom for a evo ever it made my car run like total **** when i flashed it temp with seans tune transfer.


And last I want to apologize to sean for making him think there was a problem when it was my dumbass not turning off tephra options!!!!!!!
You know you have to change a couple of tables when changin rom families ie 9417 to 9642 to have it run right. You just cant swap them.

Last edited by Evo_Jay; Oct 6, 2009 at 04:57 PM.
Reply
Old Oct 6, 2009 | 04:28 PM
  #84  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
Originally Posted by Evo_Kid
You know you have to change a couple of tables when changin rom families ie 9417 to 9642 to have it run right. You just cant swap them.
which tables? the car is driving fine... 9417 is the rom my original tune was performed on by sean so im pretty sure he covered all of that stuff.
Reply
Old Oct 6, 2009 | 04:56 PM
  #85  
Evo_Jay's Avatar
Evolved Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (17)
 
Joined: Jun 2005
Posts: 3,419
Likes: 14
From: Chico, CA (NOR-CAL)
Originally Posted by tscompusa
which tables? the car is driving fine... 9417 is the rom my original tune was performed on by sean so im pretty sure he covered all of that stuff.
I understand. I was saying when you put the 9642 ROM on and it ran crappy. It did that cuz theres some table you have to change when changing ROM families. I forgot which exact ones, id have to search.
Reply
Old Oct 6, 2009 | 04:59 PM
  #86  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
Originally Posted by Evo_Kid
I understand. I was saying when you put the 9642 ROM on and it ran crappy. It did that cuz theres some table you have to change when changing ROM families. I forgot which exact ones, id have to search.
oh ok. Ya, just shifting at 3-3.5k was jerky compared to the 9417 rom. The 9417 rom was originally created by mr.turco for me.
Reply
Old Oct 6, 2009 | 05:07 PM
  #87  
Evo_Jay's Avatar
Evolved Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (17)
 
Joined: Jun 2005
Posts: 3,419
Likes: 14
From: Chico, CA (NOR-CAL)
Originally Posted by tscompusa
oh ok. Ya, just shifting at 3-3.5k was jerky compared to the 9417 rom. The 9417 rom was originally created by mr.turco for me.
ok. Im sure Ivey and mr turco both did a great and proper job.

Just for reference, what ROM id came on your car from the factory (or when you got it)
Reply
Old Oct 6, 2009 | 05:09 PM
  #88  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
Originally Posted by Evo_Kid
ok. Im sure Ivey and mr turco both did a great and proper job.

Just for reference, what ROM id came on your car from the factory (or when you got it)
check my posts.... it came with a 96420008, but check my posts and have a laugh, because its an old AL tune like that other thread we are talking in as well
Reply
Old Oct 6, 2009 | 05:09 PM
  #89  
Evo_Jay's Avatar
Evolved Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (17)
 
Joined: Jun 2005
Posts: 3,419
Likes: 14
From: Chico, CA (NOR-CAL)
Originally Posted by tscompusa
check my posts.... it came with a 96420008, but check my posts and have a laugh, because its an old AL tune like that other thread we are talking in as well
Lol. okay.
Reply
Old Oct 6, 2009 | 05:15 PM
  #90  
tscompusa2's Avatar
Thread Starter
Former Sponsor
iTrader: (22)
 
Joined: Oct 2005
Posts: 5,375
Likes: 10
From: pa
Originally Posted by Evo_Kid
Lol. okay.


look familiar?
Reply



All times are GMT -7. The time now is 07:04 PM.