What kind of power would one expect on a FP Red on PUMP, 93 Octane at 27-28PSI?

Thank you

 

I would guess 420whp.... i could be off.....

 

hmm I would say typically 25 or so on pump 425 wheel on my dyno.

27-28 you should be in the region of 450.

Sean

 

Also depends on the setup some make more than others.

Sean

 

Can we get away with 27-28PSI on pump? You recently tuned me for 26PSI on my Stock IX turbo and we made 350/350 and no knock, I would imagine that 27-28PSI on a red should be acceptable due to the much more efficient flow of the Red turbo?

 

really depends, we would have to test, but I think it can be done.

Sean

 

Well I think you can do it. I am looking to get a Red real soon, I would love 450WHP Pump gas Red Turbo numbers. I can't think of a better street setup unless you build your motor.

 

Right on target..

Our dynojet showed 27psi approx and 450whp with the Red today.. The combination must be right as you know.. Junk parts yield junk #'s.. Doesnt matter if its on a red or 35r..

Mike

 

I gotta kick *** combo, mostly AMS parts, hopefully 450 could be achievable. That would be my dream for a street ride.

 

well put mike....junk parts equal's junk #'s i made over 500 whp on a stock block,stock cams,and intercooler piping,at around 30 psi with meth...the red i s a sick little street strip turbo..for what it is it cant be touched.....

 

yes the fp red is nice. I'll have a iveytune round 2 in here within a month or less. new setup will consist of buschur 2.3 + map rev3 im, milspec 65mm tb, kelford 272, ARP L19 head studs, etc..

 

i read you have to do extra work to get l10 head studs to fit properly. how much truth is there to that since your going with them??

 

Very nice parts select goig the same route that manifold is golden...

 

sounds like horse **** to me.... all they are is stronger material.

 

yep. cars gonna be around 560-570 on a conservative tune. I want it to hold up for awhile. Depending how much boost is required for those numbers i may switch to fp black.

rev3 mani is very nice... make sure you get the 65mm tb also, its a must have combination. I was going to get magnus v5, but im not down with chopping my bay around just to fit it.