Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

built 2.4 ETS 6235 john bradley tune

Thread Tools
 
Search this Thread
 
Old Jul 16, 2010 | 10:30 AM
  #46  
BLKCarbonEVO's Avatar
Evolved Member
iTrader: (2)
 
Joined: Nov 2008
Posts: 3,463
Likes: 4
From: VaBeach, VA
Originally Posted by Brandon03Evo
thanks mikey. i am very happy with it all i need now is some injectors and E85
That would be nice! You should come up to the NOS meet/race at pacific raceways on Sunday.

Mikey
Reply
Old Jul 19, 2010 | 07:05 PM
  #47  
Brandon03Evo's Avatar
Thread Starter
Newbie
iTrader: (1)
 
Joined: Feb 2010
Posts: 68
Likes: 0
From: vancouver, wa
Originally Posted by BLKCarbonEVO
That would be nice! You should come up to the NOS meet/race at pacific raceways on Sunday.

Mikey
i would have but was on the river getting some steelhead sunday... but i ordered my new injectors and new fuel pump system and english is going to pull my oil pan and check everything in the bottom end before we start to push the motor on E85
Reply
Old Jul 24, 2010 | 10:52 AM
  #48  
nonschlont's Avatar
Evolved Member
iTrader: (3)
 
Joined: Mar 2007
Posts: 1,760
Likes: 2
From: Ca
nice results, congrats!!! Graph looks powerful, and purrrty! Aaron + ER = WIN!!!
Reply
Old Jul 24, 2010 | 04:09 PM
  #49  
Brandon03Evo's Avatar
Thread Starter
Newbie
iTrader: (1)
 
Joined: Feb 2010
Posts: 68
Likes: 0
From: vancouver, wa
Graph should look even better on E-85 with a little more boost....Cant wait
Reply
Old Jul 24, 2010 | 05:40 PM
  #50  
RockmanX's Avatar
Evolved Member
iTrader: (78)
 
Joined: Aug 2008
Posts: 6,623
Likes: 4
From: Louisiana
thats is so cool to buy a evo with a built motor and did not even know it. I wonder what internals are in there and how much power or rather tq will it hold. How power are you shooting for?? what size injectors you up to?
Reply
Old Jul 24, 2010 | 09:02 PM
  #51  
R/TErnie's Avatar
Evolved Member
iTrader: (32)
 
Joined: Aug 2003
Posts: 5,380
Likes: 6
From: WAR EAGLE!
Nice work again! Aaron and English Racing bringing home the bacon!
Reply
Old Jul 24, 2010 | 10:59 PM
  #52  
Brandon03Evo's Avatar
Thread Starter
Newbie
iTrader: (1)
 
Joined: Feb 2010
Posts: 68
Likes: 0
From: vancouver, wa
Originally Posted by RockmanX
thats is so cool to buy a evo with a built motor and did not even know it. I wonder what internals are in there and how much power or rather tq will it hold. How power are you shooting for?? what size injectors you up to?
i dont really have a power goal if i make over 600 i will be happy.... this week english is going to pull the pan and inspect the bearings and we will have an idea of what is done to the bottom end..Aaron recomended 1450 FIC injectors and they are doing dual fuel pump set up also...
Reply
Old Jul 26, 2010 | 10:21 AM
  #53  
ETS Michael's Avatar
Former Sponsor
iTrader: (91)
 
Joined: Mar 2007
Posts: 8,685
Likes: 54
From: Vancouver, WA
Hey Brandon,

Good seeing you at the track. I recorded your 11.6 run. I will try to get it up tonight so you have it. This car is going to a monster with E-85 and a clutch upgrade.

Thanks,

Michael
Reply
Old Jul 26, 2010 | 06:48 PM
  #54  
Brandon03Evo's Avatar
Thread Starter
Newbie
iTrader: (1)
 
Joined: Feb 2010
Posts: 68
Likes: 0
From: vancouver, wa
yeah it should be fun on E-85 once i get a new clutch that will let me launch the car at that power level i dont think the ACT will let me do that
Reply
Old Jul 26, 2010 | 09:52 PM
  #55  
sparky's Avatar
Evolved Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 7,905
Likes: 5
From: Mesoamerica/ SF Bay Area
Maybe I missed it....but, what was your 60' on the 11.6 run?
Reply
Old Jul 26, 2010 | 10:02 PM
  #56  
Brandon03Evo's Avatar
Thread Starter
Newbie
iTrader: (1)
 
Joined: Feb 2010
Posts: 68
Likes: 0
From: vancouver, wa
i do not have the time slips in front of me but i belive they were 1.7 or 1.8 60'
Reply
Old Jul 29, 2010 | 05:52 PM
  #57  
JohnBradley's Avatar
Evolved Member
Shutterbug
Liked
Loved
Community Favorite
iTrader: (30)
 
Joined: Jan 2004
Posts: 11,406
Likes: 78
From: Northwest


Not bad for a stock intake. Needs a ported one or a Magnus and I think there is another 45-50whp to be had.

For those that have photobucket blocked, 636/509 @ 34psi.

Reply
Old Jul 29, 2010 | 06:10 PM
  #58  
yahu's Avatar
Evolved Member
iTrader: (55)
 
Joined: Aug 2006
Posts: 3,282
Likes: 0
From: Monroe - WA
^Hay-Zeus ni Christo! Why can't something like that happen to me. Instead I get friggin' Friday build craftsmanship!

Congrats Brandon! This was on e85, I assume?
Reply
Old Jul 29, 2010 | 06:17 PM
  #59  
BLKCarbonEVO's Avatar
Evolved Member
iTrader: (2)
 
Joined: Nov 2008
Posts: 3,463
Likes: 4
From: VaBeach, VA
Congrats again Brandon! You got your 600 Now shoot for 675!

Mikey
Reply
Old Jul 29, 2010 | 06:52 PM
  #60  
boostedwrx's Avatar
Evolved Member
iTrader: (27)
 
Joined: Dec 2002
Posts: 5,034
Likes: 2
From: Seattle, WA
Woa that will kick some *** on the street!
Reply



All times are GMT -7. The time now is 08:07 AM.