Xona 78/64?
#2
EvoM Guru
iTrader: (1)
https://www.evolutionm.net/forums/ev...hp-inside.html
You'll probably spool it about 400 rpm slower. Make a bit less torque/power because of lower displacement.
You'll probably spool it about 400 rpm slower. Make a bit less torque/power because of lower displacement.
#3
Evolved Member
iTrader: (39)
A bit slower than what mine was. Also have to remember the turbine is bigger than the gt35 turbine used in the hta86. gt35 turbine is 68mm inducer with a 62.3mm exducer. The xona 64mm is a 64mm exducer.....not sure of inducer size. I had full boost at 4900rpm....so figure you'd be full honk in 3rd at 5500 or so.
#4
Evolving Member
used it would just jump to a pte turbo
bros car has one making 540 whp on a 2.3 at 24 psi but from what ive been told wont make as much power as a pte turbo and they do use a 64mm wheel thats why i compare it more to an inbetween of a 6266 and 6466
xona turbo sells just havent been doing well
bros car has one making 540 whp on a 2.3 at 24 psi but from what ive been told wont make as much power as a pte turbo and they do use a 64mm wheel thats why i compare it more to an inbetween of a 6266 and 6466
xona turbo sells just havent been doing well
#5
EvoM Guru
iTrader: (1)
The 7864 would be a 6264. Unfortunately, never really have seen results of any of the Xona stuff on Evo's to make a real comparison. Lots of Euro guys, P cars, and GTR's run them though.
I have the Xona CHRA Red. The CHRA is awesome.
I have the Xona CHRA Red. The CHRA is awesome.
Thread
Thread Starter
Forum
Replies
Last Post
I-5 Evo
Evo Engine / Turbo / Drivetrain
121
Oct 28, 2017 06:04 AM
tscompusa
Evo Dyno Tuning / Results
25
Oct 19, 2015 09:59 PM
ch53avitech
Evo Engine / Turbo / Drivetrain
5
Sep 25, 2015 09:49 AM