Post exact weights of weight reduction you have done!
I had the solid dif mounts before I got the new version with bushings. The vibration noise with solid was unbearable. I would assume that rear sub frame would make for some serious vibration and in cabin noise.
Marco will probably tell you to "hand in your man card" if you are complaining about noise 
found some weight reduction on the frame in the rear, they are little perches where it would seem is the position to place the hoist points on. Remove with a 12 mm socket ( the weight was substantial)
found some weight reduction on the frame in the rear, they are little perches where it would seem is the position to place the hoist points on. Remove with a 12 mm socket ( the weight was substantial)
In other news.. in the process of purchasing an aluminum 3 inch exhaust which weighs only 9 pounds ... Should save some weight when compared to my 3 inch JUN BL
Marco will probably tell you to "hand in your man card" if you are complaining about noise
found some weight reduction on the frame in the rear, they are little perches where it would seem is the position to place the hoist points on. Remove with a 12 mm socket ( the weight was substantial)
found some weight reduction on the frame in the rear, they are little perches where it would seem is the position to place the hoist points on. Remove with a 12 mm socket ( the weight was substantial)
Over 5lbs do you think?
I think what you are talking about Wayne, you can see removed in this picture, correct? The 2 red spots in the middle where there is no under coating? And I doubt those are 5 lbs...
Don't tempt Dan, he is like a weight reduction gnome...he will show up to your house in the middle of the night...u will wake up the next morning and he will either be passed out on your garage floor with your car in pieces OR your car will magically be 100lbs+ lighter and not look any different, haha...