Hi,
I installed the Apexi Turbo timer today on my 05 Evo MR, with the harness also. When I go to turn of the car on the first click it starts to count down, when I do the last key click to before taking the key out it turns off the car and the counter stops. Is there any hard wiring needed or any thing I need to do out side the harness ?
Thanks guys.
Talal.

 

mt-6 harness? Did you wire the handbrake wire? Maybe it's different from HKS install.

 

No MT-1 ! And I didn't wire the hand brake either ! It plugs right in ( harness) do you think I got the wrong one ?

 

? Any one know why ? HELP

 

you need the MT-6, tiger. It maybe that your MT-1 is not wired properly for the Evo.

do the parking brake wires too and change your wire harness. Then you'll be ok.

 

Should i wtich to MT6, I am using MT1 harness now.

Which wire under the parking brake handle do I connect it to ?

 

It's the blue wire that goes to the parking brake. You have to reveal it under a black wrap.

 

??????? Help

 

just have to turn the key faster, same thing happens to me also i have the same timer. i dont have the parking brake hookedup either, but i never hooked it up to any of my DSM's either. *edit, it only happens in the Evo.

 

turn the key faster should work that way same prob with me

 

 

I'm going to the grage to try it...I'll be right back....

 

Hay Khalid I think I have the worng harness was reading the manual and it said I need a MT-6 type harness for CT-9A and I am using MT-1 and that is for the 1st gen DSMs Thanks for the help guys.
Talal