20G and Dynoflash
Originally Posted by kiddevo
Im still waiting to see Al dyno one at pruven.Im hoping to see over 400whp on pump and alky and br stage 4.
Good luck and if you do get over 400 whp then maybe there's something wrong with my car or the dyno numbers could be wrong.
If you are flashing the ECU then the largest cam I suggest running are the 272's.
David Buschur
www.buschurracing.com
David Buschur
www.buschurracing.com
Originally Posted by GOKOU
Good luck and if you do get over 400 whp then maybe there's something wrong with my car or the dyno numbers could be wrong.
Originally Posted by davidbuschur
Wow, nice suprise finding this today. Very nice, glad you are happy with the turbo, so am I!
Al drove my RS while he was here and was VERY impressed with the car.
There is a track rental tomorrow, if it doesn't rain I should have some new numbers on my car with the 20G.
BTW, it made 361 whp on our AWD MD Dyno last week. I didn't have time to post charts or even mention it for that matter until now.
The runs were on race gas and 25-26 psi of boost. AFR's in the mid 11's.
David Buschur
www.buschurracing.com
Al drove my RS while he was here and was VERY impressed with the car.
There is a track rental tomorrow, if it doesn't rain I should have some new numbers on my car with the 20G.
BTW, it made 361 whp on our AWD MD Dyno last week. I didn't have time to post charts or even mention it for that matter until now.
The runs were on race gas and 25-26 psi of boost. AFR's in the mid 11's.
David Buschur
www.buschurracing.com
Originally Posted by EVO8LTW
GOKOU, do you also have a 20G? I saw your old post about making a little over 300 whp on the BR dyno with stg 4 and alky at 25 psi.
Misread it. I thought he was talking about all the above on stock turbo 
I have no doubt the 20g will make over 400 whp with stg 4 and alky.
Thread
Thread Starter
Forum
Replies
Last Post
PERRIN_JOHN
General Engine Management / Tuning Forum
24
Apr 23, 2009 11:01 AM
DynoFlash
Evo Engine / Turbo / Drivetrain
25
Jul 8, 2008 09:34 PM








