Well I was running the BPR8ES and they were fouling quick. I was getting sputtering throughout the mid RPM range. Once I got cams and got tuned i was still having the problem.

I purchased the BPR7ES and gapped them to .026. When I did the install I took alot of time and extensively cleaned my valve cover, spark plug wires, coils and the actual ports where the spark plugs go into the head. I still have the magnacore wires. Where the wire comes out of the boot I actually pressed the wire into the boot so the wire came out of the boot at a 90 degree angle instead of staight out of it. It is difficult to explain without a pic..............Ive had this setup for a month and not one sputter.....Im still throwing the p0300 code...btu that is due to my flash.

 

I think he was talking to Evoonyoass.

 

Yes I was talking to our other "buddy" Evoonyoass

 

Here is another one who throws a question on the table, but doesn't care about telling us if he fixed it or not, AND what FIXED IT!! SHEEESH!!