Ok I have done some searching and guess I don't know what to call it. I installed a MR Manifold/O2 Housing and Buschur TBE yesterday and my DP is tight against the front "cross-bar"

Is this supposed to happen? It doesn't make noise or rattle but I am concerned it will dent my DP, help me out please!

 

Didnt your dp come with spacers? My Buschur did.

 

I didn't get any spacers with my kit

 

Call them and tell them. They will probably hook you

 

Ok do the spacers go on the bolts that hold the crossbar, if this is the case I have hardware in the shop right here. Is this how you remedy this, will it affect anything?

 

You can remedy it with longer bolts and spacers for the crossbar. You could definitely pick them up from Home Depot.

 

Solved, Thanks!

 

They go between the cross bar and the orgional mounting surface of the bar. And you use the supplied longer bolts...

 

Your exhaust should have came with a hardware kit in the box. It has ALL of the hardware to install the exhaust along with the spacers. How did you install the rest of the exhaust? We pre package the hardware kits prior to shipping so we make sure everything is in them that is needed.

Its a good chance it was overlooked in the bottom of the box. Some times it gets mixed in with the shredded paper.