HALLMAN MBC question
#6
Evolving Member
iTrader: (3)
I'm having the same issue.. my hallman MBC is turned up all the way also... and it only peaked at 20psi on 4th-6th gear. around 18-19psi 1st-3rd. I know to solve the problem is to replace the soft spring with the hard spring.. I was wondering if there's a place where i can buy the harder spring, since i accidently mis-placed somewhere. if anyone can help me out so I can get my car re-tuned at a higher boost. I want to boost atleast 23-25psi...
Alright I hooked up my MBC to the wastegate line and tapped off the BOV, I can only lower the boost and when I turn it all the way up its the same when it was stock. I read that you should disconect the battery but its late and my alarm goes off if I do that so tomorrow I'll try that.
The max boost I have is 19-20psi with it turned all the way up. I have the soft spring in it right now.
Any useful suggestions are apriciated.
The max boost I have is 19-20psi with it turned all the way up. I have the soft spring in it right now.
Any useful suggestions are apriciated.
Trending Topics
#8
Newbie
iTrader: (1)
Join Date: Jan 2004
Location: Bend, OR
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
The light spring should work fine for 23-25 PSI. I have had no issues with mine. Not to sound like a jerk but ...is it hooked up correctly? Did you bypass the boost control solenoid when installing like Hallman recommends?
#9
Evolved Member
iTrader: (56)
#12
Evolving Member
iTrader: (3)
Yes it is hooked-up correctly, I followed the instructions from hallman, and one of the thread from EVOM. I changed all the stock vaccum hoses to make sure there's no restrictor. but still same results. MBC is turned all the way up, and its only peaking 20psi.... I might just try to get the heavy spring to see any difference before i go out and buy a new one....
#13
Newbie
iTrader: (1)
Join Date: Jan 2004
Location: Bend, OR
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
It was worth a shot...sometimes it the simple stuff we overlook. Wonder if my boost controller came with the heavy spring already installed. I didn't request it but stranger things than that have happened to me.
Yes it is hooked-up correctly, I followed the instructions from hallman, and one of the thread from EVOM. I changed all the stock vaccum hoses to make sure there's no restrictor. but still same results. MBC is turned all the way up, and its only peaking 20psi.... I might just try to get the heavy spring to see any difference before i go out and buy a new one....
#14
Evolving Member
Join Date: Sep 2006
Location: Reno, NV
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
This is weird, because i have the FORGE MBC and it came with the hard spring and soft spring. With the soft spring in, i can only boost to 20psi. Whats weird is that when i put the hard spring in, it spikes to 30psi, then holds at about 26. Thats overboosting, and i took it out immediately. I have no clue why this happens.
#15
This is weird, because i have the FORGE MBC and it came with the hard spring and soft spring. With the soft spring in, i can only boost to 20psi. Whats weird is that when i put the hard spring in, it spikes to 30psi, then holds at about 26. Thats overboosting, and i took it out immediately. I have no clue why this happens.