Hello,

I was "going" to change the fluid in my 6-speed today, but I cant find the fill or the drain plugs. I was hoping someone did this before and could help me out. I did the tc today which was real easy to find, i found where the 8 tranny plugs are but nothing on the 9's corresponds.

 

Hex head insert bolts facing the drivers wheel well... one on bottom for drain and one on the upper left for fill. Fill until overflow as with diff and tc.

Put your head in front of the drivers side wheel and look straight in (with the splash gaurd off)




2.3 QT of SuperDiaqueen and torque to 26FT-LBs

 

10mm hex key/socket.

 

Take a look at this thread
https://www.evolutionm.net/forums/sh...ad.php?t=75589

 

Thanks a lot, I used bg synchroshift, and the car has never shifted better!!!

 

just so you know they just came out with an updated version of dyaqueen for the 6 spds. i just picked it up from the dealer last week... its so new the label is in japaneese lol

 

BG synchroshift does not meet factory requirements, just FYI.

 

Bg shifts good. But tranny won't tolorate it for long.

 

They probably went back to the old stuff after realizing the super milti was not working as well as the original diaqueen..It's hit or miss at the parts counters these days.