I recently got this clutch installed and it fells notchy while shifting gears and makes a weird engagement sound like a loud squeak honk, just wondering if these things are normal. and does anyone where i can find the pedal stop?

 

Tilton Carbon/Carbon?? If so, that noise is normal. It shouldn't feel notchy when shifting...it should be smooth as butter!

Pedal stop is right behind the clutch pedal. Might want to make sure you have the pedal adjusted right...could be part of your notchy shifting problem and will prematurely wear the clutch out.

 

it is normal

 

its a race clutch... what would you expect

 

Noise is normal, notchy isnt.

As suggested adjust clutch or the pedal stop since the Tilton uses a hydraulic throw out bearing and no slave cylinder. some of it might be the choice of gear oil and whether its been warmed up or not.

 

the clutch is not very happy when it is cold, once it warms up the notchyness should go away.

 

it's cerametallic, and the notchiness doesn't go away once it has warmed up, i was expecting some noise but that honk sound wasn't expected. I don't have the clutch stopper installed so should i get one and if so where can i get it