Lean Idle 18.4!!!!!
Mine does it warm or cold. Injectors are scaled fine with in 5%. Idle and cruise. Maf scaling did not make a difference either.
I don't really care too much though the car is going to get a stand alone at some point. The leaner idle wont hurt the car. As long as it's fueling properly in higher load areas and at higher piston speeds it'll be fine
I don't really care too much though the car is going to get a stand alone at some point. The leaner idle wont hurt the car. As long as it's fueling properly in higher load areas and at higher piston speeds it'll be fine
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
okay I found 2 small exhaust leaks, and fixed them, but still the car a/r falls to 18.4, after a while I decided to uplaod the bas map that my tuner sent me, and when I did the car start to idle fine and the a/r reads 14.7-15.3.
So if am not wrong I think it's the tune, am gonna check it with my tuner and see if there's something he forgot.
If you guys got any suggestion please let me know thanks
So if am not wrong I think it's the tune, am gonna check it with my tuner and see if there's something he forgot.
If you guys got any suggestion please let me know thanks
Thread Starter
Newbie
Joined: Nov 2008
Posts: 10
Likes: 0
From: Home
Okay, I decided to attach 2 logs, both with the car idleing for 12min.
And guys if read what I said in first post, the car idle like normal on cold start, but once the car warms up it falls to 18.4, you can see that in one of the log that I attached
Guys please check them and tell me what you think
Thanks
And guys if read what I said in first post, the car idle like normal on cold start, but once the car warms up it falls to 18.4, you can see that in one of the log that I attached
Guys please check them and tell me what you think
Thanks
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
I think you need to give your tuner a chance to figure it out...sounds like you've had some mechanical issues which caused him to waste his time, now those issues are fixed and the tuner needs time to start over.
hes asking for help from anyone else. if the tuner is busy or something and cant answer 24/7.. All he wants is other input I dont think hes putting the tuner down at all.... Hope you get everything solved and running Good...
Thread Starter
Newbie
Joined: Nov 2008
Posts: 10
Likes: 0
From: Home
Mellon am only trying to find if there's a problem with my car, and thank god I solve it
Thanks every one for helping me out
4WS is the man he was able to let me find, and fix the problem, now we're doing cruising logs, and soon some power is on the way.
Wish me luck guys, and thanks again to everyone
Thanks every one for helping me out
4WS is the man he was able to let me find, and fix the problem, now we're doing cruising logs, and soon some power is on the way.
Wish me luck guys, and thanks again to everyone
Mellon am only trying to find if there's a problem with my car, and thank god I solve it
Thanks every one for helping me out
4WS is the man he was able to let me find, and fix the problem, now we're doing cruising logs, and soon some power is on the way.
Wish me luck guys, and thanks again to everyone
Thanks every one for helping me out
4WS is the man he was able to let me find, and fix the problem, now we're doing cruising logs, and soon some power is on the way.
Wish me luck guys, and thanks again to everyone
Thread Starter
Newbie
Joined: Nov 2008
Posts: 10
Likes: 0
From: Home
it was the tune, we went back to the base map, did a idle log than 4WS sent me another map and everything went back to normal, the guy just never gives up
Finished scaling the injecotrs now doing some pulls
Finished scaling the injecotrs now doing some pulls
Thread
Thread Starter
Forum
Replies
Last Post
Raceghost
ECU Flash
22
Jun 1, 2016 12:30 AM
Gary@MellonRacing
Evo Dyno Tuning / Results
27
May 13, 2011 07:07 PM
BoostLover99
Evo Dyno Tuning / Results
32
Sep 8, 2010 03:49 PM
David Buschur
Evo Engine / Turbo / Drivetrain
187
Mar 23, 2008 05:06 PM
