I've searched but can't find what ohm reading the plug wires are supposed to have. 06 evo and i'm getting 2.8 ohm's on the small wire and 5.7 ohm's on the longer wire. I have new plugs in and the damn car is popping at idle and when the engine is under load it pops and stalls. Did a compression test and checked over everything, i think. Any help would be greatly appreciated...

Thank's Walt

 

This **** is driving me nuts. It's cold in my garage, car won't start, tried just about everything.

I've been having problem's all week trying to get this thing running right. Did a lot of mods this winter and just want to get it running so i can get it tuned..

Edit: Mods

Fp Black, intake pipe, k/n cone filter, stock maf
GSC s2 cams, beehive springs
3" o2 housing, tbe, cat delete
aem uego gauge
arp headstuds, new oem head gasket
ported IM, heat transfer gasket, egr deleted
walboro 255, fic 1250's

I think that's it..


Please help me before i shoot myself. LOL

 

Bump, Please help!!!

 

Cheese and rice 44 views and no responce.............

Please help

 

Wish i could help I hope this responses eases your mind

 

does it crank? just no start? Are your injectors scaled?

 

swap out the plug wires for new ones, you've got a bad connection sir

 

Thank's guy's, it crank's over but doesn,t start every time. When it does start it pops threw the exhaust like a missfire. I'll try new wires and see what happens. Yes my injectors are scaled for now till i start tuning them.

 

had that exact problem, freaked out, wires had no resistance like yours, swapped wires to some el cheapo napa ones for $30 and been fine ever since

 

Cool thank's for the info, I'll try the wires.....