cool thanks for help. so tell me if this will work. 3 inch monster dp or pretty much any three inch dp +3 inch ultimate racing test pipe + hks exhaust. or should i go with a jic exhaust?

 

JIC Titanium baby!

 

Our systems do not use a reducer either. We have done some tests and as the HP gets higher that small reducer will really choke off the flow.

Our full 3" system with the testpipe also does NOT throw a CEL, weigh in at only 24 pounds and costs only $750 in fully mandrel bent 304 stainless steel.

David Buschur
www.buschurracing.com

 

the monster sports downpipe is NOT 3" just for the record. it is 70mm and for some reason eveybody says it is 3".

 

So since the HKS has a reducer to fit the stock cat, does that mean that if wont fit a 3" high flow cat?

 

Better ditch the idea you need a 3" exhaust to make serious HP. Plenty of high HP 500+ without 3" exhausts.

 

i just want to do it right the first time. i am getting 3inch turbo back. just trying to see what set up will work good with a jic exhaust or hks exhaust. and i just want sumthing that doesn't throw a check light.