Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

car overheats under boost...

Thread Tools
 
Search this Thread
 
Old May 20, 2010 | 06:19 AM
  #16  
evo4life400's Avatar
Thread Starter
Evolving Member
iTrader: (11)
 
Joined: Aug 2008
Posts: 434
Likes: 0
From: Northeast
i do have ARP headstuds but do i really have to buy a whole nother set of them?i have only had them on for probably 5k miles....i must have torqued them wrong when i was doing the 1X1 method.
Reply
Old May 20, 2010 | 05:58 PM
  #17  
evo4life400's Avatar
Thread Starter
Evolving Member
iTrader: (11)
 
Joined: Aug 2008
Posts: 434
Likes: 0
From: Northeast
i talked to my tuner and he said he will look to see if he saved my data. would i be able to get the data if i buy a tactrix cable and download ecuflash?
Reply
Old May 20, 2010 | 06:37 PM
  #18  
turbotalawd's Avatar
Evolved Member
iTrader: (11)
 
Joined: Sep 2009
Posts: 515
Likes: 1
From: U.S.
Originally Posted by evo4life400
i do have ARP headstuds but do i really have to buy a whole nother set of them?i have only had them on for probably 5k miles....i must have torqued them wrong when i was doing the 1X1 method.
No you do not need to buy new headstuds you can reuse those.

Doing the 1x1 method might be why your headgasket is blown.
Reply
Old May 20, 2010 | 08:36 PM
  #19  
evo4life400's Avatar
Thread Starter
Evolving Member
iTrader: (11)
 
Joined: Aug 2008
Posts: 434
Likes: 0
From: Northeast
i hope its not the head gasket...im trying to sort this sh*t out but its not going well...
Reply
Old May 20, 2010 | 10:00 PM
  #20  
EvolNinja's Avatar
Evolved Member
iTrader: (22)
 
Joined: Nov 2007
Posts: 1,638
Likes: 2
From: Wisconsin
For proper tune, you'll need wideband, boost controller and boost gauge. Hope you get the problem fixed. GL
Reply
Old May 21, 2010 | 09:01 AM
  #21  
barneyb's Avatar
Evolved Member
 
Joined: Jun 2006
Posts: 6,902
Likes: 151
From: Grand Island, NE
Originally Posted by evo4life400
i dont have a wideband but both of the tuners said the AFR's were on the money. the fan is all hooked up and i do see it go on when i turn the air on and stuff....i am going to try and get the logs from my tuner...hopefully he will send them to me!
I'd suggest, to see if the fan is actually operating, idle the engine and hang around the engine compartment until you see the fan on without AC.
Reply
Old May 21, 2010 | 02:11 PM
  #22  
evo4life400's Avatar
Thread Starter
Evolving Member
iTrader: (11)
 
Joined: Aug 2008
Posts: 434
Likes: 0
From: Northeast
i actually noticed that the fan doesnt turn on without the A/C on.....ill look at it again but i did notice that it doesn't go on when its idling....it must go on when im driving without the AC on or wouldnt my car overheat?
Reply
Old May 22, 2010 | 08:22 AM
  #23  
a_awdgsx's Avatar
Newbie
iTrader: (2)
 
Joined: Oct 2008
Posts: 57
Likes: 0
From: chicago
most like your head gasket, when you change it out arp headstuss!
Reply
Old May 24, 2010 | 02:19 PM
  #24  
barneyb's Avatar
Evolved Member
 
Joined: Jun 2006
Posts: 6,902
Likes: 151
From: Grand Island, NE
Originally Posted by evo4life400
i actually noticed that the fan doesnt turn on without the A/C on.....ill look at it again but i did notice that it doesn't go on when its idling....it must go on when im driving without the AC on or wouldnt my car overheat?
Well, drive it until warm then park and idle - the fan should kick on within a minute for two. If it doesn't, something is wrong with the fan.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CT9A PR
Evo Engine / Turbo / Drivetrain
7
Nov 6, 2014 10:56 AM
jaredh
ECU Flash
21
Mar 26, 2013 04:22 PM
deadstockkpomp
Evo General
6
Jul 8, 2012 03:06 PM
Heezayx
General Engine Management / Tuning Forum
7
Dec 12, 2011 06:07 AM
Evokid03
Evo General
9
Mar 21, 2010 01:24 PM




All times are GMT -7. The time now is 02:07 AM.