MY......girlfriends 05 evo 8.5 MR ballin on a budget build
#78
Evolving Member
iTrader: (5)
Join Date: Aug 2009
Location: marion,virginia
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
sweet should make good numbers let me know how you like the clutch it takes along time to break in .
at first mine chatterd like hell and would stall when coming to a stop light because of the flywheel being so light.
give me your input when you get to driving it
at first mine chatterd like hell and would stall when coming to a stop light because of the flywheel being so light.
give me your input when you get to driving it
#80
Evolving Member
Thread Starter
iTrader: (11)
Join Date: Nov 2010
Location: Seattle
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
I like it so far, it did almost stall today turning a corning at a light as I down shifted but the car also isnt tuned yet either so its not exactly running perfect. Just has a base map Aaron at english uploaded to the ecu. Chatter isn't as bad as some lighten flywheels ive had.
#81
Evolving Member
iTrader: (13)
Join Date: Jan 2010
Location: Seattle
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
You can't really tell they're rolled just because you don't really see it. All you would have to do is get some spacers just to get them closer to the fender but measure so you don't get too thick of a spacer.
I'm just waiting for the other wheels I special ordered to come in and then im going to install the 265/35/18 hankook RS-3's on them. Stretch is just to fit the CCW wheels and complete the look but I also have a set of wheels for function also.
I'm just waiting for the other wheels I special ordered to come in and then im going to install the 265/35/18 hankook RS-3's on them. Stretch is just to fit the CCW wheels and complete the look but I also have a set of wheels for function also.
I want mine rolled Does it damage the paint or create a bunch of creases? If I were to get spacers wouldn't rolling them give the evo a wider looking stance?
#82
Evolving Member
Thread Starter
iTrader: (11)
Join Date: Nov 2010
Location: Seattle
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
If you do it right it wont damage anything, yes it would give it a wider stance with the spacers and the rolling would keep it from rubbing. Im going to try and make it to the meet this Saturday so if you're there you can see what they look like in person.
#83
Evolving Member
iTrader: (13)
Join Date: Jan 2010
Location: Seattle
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Edit: Spoke too soon lol. Well depending on weather and how my girls feeling I'm down! I haven't been to an evo meet yet. My car is hella dirty too so i dunno
Last edited by Graphic; Jan 26, 2011 at 04:10 PM.
Thread
Thread Starter
Forum
Replies
Last Post